1240015 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, 5-position, Pin, straight, M12-SPEEDCON, coding: B, Rear mounting, Pg9, Solder pins, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Easy PCB assembly: one-piece connectors for wave soldering• All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design SPEEDCON fast locking system reduces cabling times Commercial data Item number 1240015 Packing unit 20 pc Minimum order quantity 20 pc Product key ABQEGL GTIN 4063151434410 Weight per piece (including packing) 13.79 g Weight per piece (excluding packing) 13.79 g Country of origin DE SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 1 (8)

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Order information: Lock nut is included in the scope of delivery Mounting Mounting type Rear mounting Pg9 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) Number of positions 5 Shielded no Coding B Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Dimensions 12 mmLength of the solder pin 12 mm Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 60 V Nominal current IN 4 A SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 2 (8)

Connection method Solder pins Contact connection type Pin Tightening torque 2 Nm ... 3 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Pin Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding B Cable/line -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 3 (8)

Pin assignment M12 male connector, 5-pos., B-coded, male side SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 4 (8)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1240015  cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

60 V 4 A - -

 UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

60 V 4 A 22 - 22 -

SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 5 (8)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 6 (8)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 7 (8)

SACC-PG9-SEAL CLM - Flat gasket 1556320 https://www.phoenixcontact.com/us/products/1556320 Pg9 flat gasket, for M12 flush-type connectors with Pg9 fastening thread PROT-M12 FS - Sealing cap 1560251 https://www.phoenixcontact.com/us/products/1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush- type plugs and I/O devices in the field Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-MSB-5CON-L180/12 SCOX - Device connector rear mounting 1240015 https://www.phoenixcontact.com/us/products/1240015 Jun 13, 2024, 6:32 AM Page 8 (8)