1239235 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, PROFINET CAT5 (100 Mbps) CAT5 (100 Mbps), 4-position, PVC halogen-free, green RAL 6018, shielded, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 2 m, PROFINET, Item is lead- free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Preassembled with cables in various standard lengths for immediate use• Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1239235 Packing unit 1 pc Minimum order quantity 1 pc Product key ABQDGI GTIN 4063151391027 Weight per piece (including packing) 161.8 g Weight per piece (excluding packing) 161.8 g Country of origin DE VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 1 (8)

General Contact connection method: Crimp connection Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector Safety note VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 2 (8)
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting Product properties Product type Circular connectors (device side) Sensor type PROFINET Number of positions 4 No. of cable outlets 1 Shielded yes Coding D Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Outer sheath, material PVC Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 250 V Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) Transmission medium Copper Transmission characteristics (category) CAT5 Connection data Conductor connection Connection method Cable connection Contact connection type Socket Tightening torque 2 Nm ... 3 Nm (Installation-side) VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 3 (8)

Insertion/withdrawal cycles ≥ 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding D Connection 2 Head design free cable end Cable/line Cable length 2 m Sercos III [93K] Dimensional drawing Cable weight 68 kg/km UL AWM Style 21694 (60 °C / 600 V) Number of positions 4 Shielded yes Cable type Sercos III [93K] Conductor structure 1x4xAWG22/7, SF/TQ Signal runtime 5.3 ns/m Conductor structure signal line 7x 0.25 mm AWG signal line 22 Conductor cross section 4x 0.34 mm² Wire diameter incl. insulation approx. 1.55 mm External cable diameter 6.50 mm ±0.2 mm Outer sheath, material PVC External sheath, color signal red RAL 3020 Conductor material Tin-plated Cu litz wires VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 4 (8)

Material wire insulation PE Single wire, color white, yellow, blue, orange Thickness, outer sheath approx. 0.90 mm Type of pair shielding Aluminum-lined polyester foil Overall twist Star quad Max. conductor resistance ≤ 120 Ω/km Insulation resistance ≥ 0.5 GΩ*km Coupling resistance ≤ 20.00 mΩ/m (at 10 Hz) Wave impedance 100 Ω ±15 Ω (at 100 MHz) Nominal voltage, cable 600 V Test voltage Core/Core 2000 V (50 Hz, 1 min.) Test voltage Core/Shield 2000.00 V (50 Hz, 1 min.) Minimum bending radius, fixed installation 3 x D Minimum bending radius, flexible installation 7 x D Smallest bending radius, fixed installation 20 mm Smallest bending radius, movable installation 46 mm Flame resistance according to UL 1685 (CSA FT 4) Resistance to oil Resistant to oil to a limited extent Other resistance UV resistant (According to UL 1581, Section 1200) -40 °C ... 70 °C (cable, fixed installation)Ambient temperature (operation) -40 °C ... 70 °C (Cable, flexible installation) Ambient temperature (installation) -20 °C ... 60 °C Environmental and real-life conditions Ambient conditions Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 5 (8)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x0,34mm 2 1 I = current strength, T = ambient temperature VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 6 (8)

ECLASS-11.0 27060308 ECLASS-12.0 27060308 ECLASS-13.0 27060308 ETIM ETIM 9.0 EC002599 VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 7 (8)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com VS-FSDBPS-OE-93K-LI/2,0X - Device connector rear mounting 1239235 https://www.phoenixcontact.com/us/products/1239235 Apr 19, 2024, 5:50 AM Page 8 (8)