1238436 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M40, Cable connector, series: SB, straight long, shielded: yes, SPEEDCON, Direction of rotation: Standard, cable diameter range: 14 mm ... 20.5 mm, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Transmission of signals, data, and power in just a single connector• CAT5 data interface for up to 100 Mbps Reduced connection time with SPEEDCON fast locking system Mechanical coding reliably prevents incorrect connections Safe use in the field, thanks to high degree of protection Consistent EMC protection for reliable connection solutions in the industrial environment Commercial data Item number 1238436 Packing unit 1 pc Minimum order quantity 1 pc Product key ABRCEB GTIN 4063151386252 Weight per piece (including packing) 368.61 g Weight per piece (excluding packing) 368.61 g Country of origin DE SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 1 (9)

WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded are applicable when combining several circuits in a cable and/or connector
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. Safety note SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 2 (9)
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connector (cable-side) Connector Insulating body Direction of rotation Standard Contact diameter Power contacts 3.6 mm Litz wire cross-section Power contacts min. 1 mm² Litz wire cross-section Power contacts max. 16 mm² Rated current Power contacts 70 A Note for max. connection cross section Rated voltage 630 V AC Rated surge voltage 6 kV Overvoltage category III Degree of pollution 3 Rated voltage (II/3) power contact 850 V DC Rated voltage (III/3) power contact 630 V AC Contact diameter Signal contacts 1 mm Litz wire cross-section Signal contacts min. 0.06 mm² Litz wire cross-section Signal contacts max. 1.5 mm² Nominal current per signal contact 8 A Note for max. connection cross section Rated surge voltage 6 kV Rated voltage (III/3) signal contact 500 V Installation height 2000 m Housing Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD- Zn) Type of locking SPEEDCON Pg screw connection none Degree of protection (plugged in) IP68/IP69K Thread type M40 Seal External cable diameter 14 mm ... 20.5 mm Seal material FKM SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 3 (9)

Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 115 °C (see derating curve) SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 4 (9)

0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] = 3x16 mm 120 Dimensional drawing Pin version: dimension A = 4.05 mm, socket version: dimension A = 0.4 mm SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 5 (9)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1238436  cUL Recognized Approval ID: E468743-20170914 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 42 A - 6 - Signal 500 V 4 A - 16 - Data 30 V 1 A - 22 -  UL Recognized Approval ID: E468743-20170914 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 50 A - 6 - Signal 500 V 4 A - 16 - Data 30 V 1 A - 22 -  UL Recognized Approval ID: E153698-20190718 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 70 A - - Signal 500 V 4 A - - Data 50 V 1 A - -  cUL Recognized Approval ID: E153698-20190718 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 28 A - - Signal 500 V 4 A - - Data 50 V 1 A - - SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 6 (9)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 7 (9)

Environmental product compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 8 (9)

PROT-M40-PW-IT-IP20 - Plastic protective cap 1577213 https://www.phoenixcontact.com/us/products/1577213 Plastic protective cap, M40, degree of protection: IP20, series: SM, SB Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SB-8ES0A8A8L33SX - Cable connector 1238436 https://www.phoenixcontact.com/us/products/1238436 Mar 12, 2024, 5:22 AM Page 9 (9)