1228819 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Connector, Range of articles: BPC, color: black, number of positions: 1, min. conductor cross section: 35 mm2, max. conductor cross section: 70 mm2, rated voltage: 1500, rated current: 250 A, Connection method: Screw/Solder connection, Contact connection type: Pin Your advantages Patented design, with 3 proofs and one rotation• Safety lock 360° free rotation and flexible wiring Foolproof mechanism installed Touch-proof Mismatching and short circuit proof Commercial data Item number 1228819 Packing unit 15 pc Minimum order quantity 1 pc Sales key AB04 Product key ABLDBA GTIN 4063151325251 Weight per piece (including packing) 52.226 g Weight per piece (excluding packing) 50 g Customs tariff number 85359000 Country of origin CN ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 1 (7)

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. Safety note ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 2 (7)
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it. Product properties Product type Connectors for energy storage Product family BPC Number of positions 1 Insulation characteristics Degree of pollution 2 Electrical properties Rated voltage (III/2) 1500 V DC 1500 (III/2.00)Nominal voltage ATD 1000 (III/2.00) AC

250 A (with 70 mm² conductor cross-section, in accordance with

IEC 61984)

200 A (with 50 mm² conductor cross-section, in accordance with

IEC 61984) Rated current

250 A (with AWG 2/0, in accordance with UL 4128)

Contact resistance ≤ 0.5 mΩ Nominal voltage UN 1500 V Connection data Connection method Screw/Solder connection Material specifications Color black Polyamide (Housing) Copper (Contact) Material Silicon (Seal) Flammability rating according to UL 94 V0 Seal material Silicon Insulating material PA Contact material Cu Contact surface material Ni/Ag Cable/line Single wire, cross section 35 mm² 70 mm² Mechanical properties Mechanical data Insertion/withdrawal cycles 100 Insertion force ≤ 75 N Withdrawal force ≥ 10 N ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 3 (7)

Environmental and real-life conditions Ambient conditions IP65 (With clearance hole)Degree of protection (when plugged in) IP65 (With clearance hole) Degree of protection (not plugged in) IP20 Degree of protection IP65/IP67 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude 4000 m Standards and regulations IEC 61984:2008 EN 61984:2008 UL 4128 Standards/specifications PPP 51090A ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 4 (7)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1228819  TÜV SÜD Type tested Approval ID: 704071905102-03 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

1500 V 250 A - 50 - 70

 UL Recognized Approval ID: E511681-20200609 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

1500 V 250 A 1/0 - 2/0 -

ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 5 (7)

ECLASS-11.0 27440390 ECLASS-12.0 27440390 ECLASS-13.0 27440312 ETIM ETIM 9.0 EC004746 UNSPSC UNSPSC 21.0 39121400 ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 6 (7)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com ES-FT-BPC-S 35-70 BK - Connector 1228819 https://www.phoenixcontact.com/us/products/1228819 Dec 20, 2024, 4:41 AM Page 7 (7)