12267 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Razor Advanced Recessed Emergency Exit, 24m Single and double-sided decals Available in low illumination area black model Chain and rod mounting with Surface and Rod Mount Kit 8 years design life at max. ambient High Quality Lithium battery (LiFePO4) and smart charger Single Point Unit (SPU) Fully compliant (AS/NZS 2293) DALI monitored emergency control Emergency monitoring with capabilities via cloud systems such as Zencontrol
ORDERING INFORMATION
Description Razor Advanced Recessed Exit Light - 24M - DALI - Black - W/CMS Driver Type DALI DT1 Emergency Item Code EV-RAZOR-ADV-24M-B-DA-CMS MECHANICAL Body Material Polycarbonate Diffuser Material PMMA Fitting Colour Black Installation Type Recessed IP Rating IP20 ELECTRICAL Electrical Rating Class II Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 2 W Standby Power 1.7 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Working Temp Range 0 to 40 °C DRIVER Driver Included Yes Integrated Driver Yes Driver Type DALI DT1 Emergency Flex & Plug or Lead Length 2400 mm Wiring Type CMS Plug (5 pin) CMS ~ Supplied with a CMS Electracom- 5 pin plug to suit QF series wiring, model number QFP3AT EMERGENCY (EM SUFFIX) Replacement Battery Code 13972 Emergency Control DALI Monitored (DT1) DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202. Decal Size 300 x 150 mm Emergency Duration 90 mins Emergency Light Source Life 34Y/04M AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign. Emergency Mode Maintained Emergency Output Power 350 mW Viewing Distance 24 m 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 5th of February 2025 07:35:52 - Page 1
Product Design Life 8 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 WARRANTY Commercial Use Warranty 6 RTB (Total 6 Years) DIMENSIONS Cutout 305 x 65 mm Product Height 265 mm Product Length 365 mm Product Width 95 mm LINE DRAWINGS EV/RAZOR/ADV/24M PHOTOMETRICS EV/RAZOR/ADV/24M ACCESSORIES Order code 00705 Description CMS 2.4M 5 Pin Plug Set - with Green Plug to suit GEN III ledfires Item Code EV-CMS-2.4M-5PIN Order code 11790 Description CMS 2.5M 5 core DALI flex and plug with bootlaced ends Item Code EV-CMS-5CORE-DALI-F&P Order code 02988 Description Razor 24m decal pack - Black to suit 02687 Item Code EV-RAZOR-24M-DP-B Order code 02982 Description Black Surface Mounted Kit to suit 2685- 2687- 2664 & 2665. Item Code EV-RAZOR-LEDFIRE-SM-KIT-B Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 07:35:52 - Page 2