12148 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Twinspot Professional High Powered IP65 Emergency Luminaire IK10 impact resistance Emergency output of 2 x 570 lm Soft-start charger to reduce building load Selectable discharge rating for hazardous areas Fast emergency switch-over (<0.5s) for high-task areas Long life electronics 12 years design life at max. ambient High Quality Lithium battery (LiFePO4) and smart charger Standalone (SPU) Self test (AS2293/ IEC62034) DALI (IEC62386-202) DT1 DALI (IEC62386)
ORDERING INFORMATION
Description Ektor Twinspot High-Powered Emergency IP65 Luminaire - PRO Driver Type DALI DT1 Emergency Item Code EV-TWINSPOT-WP-PRO-HP MECHANICAL Adjustability Adjustable Body Material Polycarbonate Diffuser Material Polycarbonate Fitting Colour White IK Rating IK10 Installation Type Surface mount IP Rating IP65 ELECTRICAL Electrical Rating Class I Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 3.7 W Standby Power 0.5 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Working Temp Range 0 to 40 °C DRIVER Driver Included Yes Driver Type DALI DT1 Emergency Wiring Type Re-wireable terminal block (6 pin) EMERGENCY (EM SUFFIX) Replacement Battery Code 01303 Emergency Control DALI Monitored (DT1) DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202. Emergency Duration 90 mins Emergency Lumen Output 1140 lm Emergency Mode Non-Maintained Emergency Output Power 7000 mW COMPLIANCE Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 5th of February 2025 06:17:00 - Page 1
AS/NZS 2293.3 WARRANTY Commercial Use Warranty 8 RTB (Total 8 Years) DIMENSIONS Product Height 129 mm Product Length 279 mm Product Width 321 mm LINE DRAWINGS EV/TWINSPOT/WP/PRO/HP PHOTOMETRICS EV/TWINSPOT/WP/PRO/HP Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 06:17:00 - Page 2