1211-60209-60211 AMPHENOL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
- NRN 44729 04/20 STW A DCN 49919 06/20 STW APPROVED: CHECKED: DRAWN: STW 04/02/20 STW 04/02/20 DTL 04/02/20 ROHS NON-COMPLIANT .171 4.34 .200 5.08 .110 .015 0.38 RP .250 6.35 2X .074 1.88 .175 4.45 .008 0.19 .0725 BODY ID 2X R.010 MAX AFTER SOLDER DIP THIS SURFACE MAY HAVE SOLDER COVERAGE THAT IS INCOMPLETE FROM SOLDER MASKING 3X .090 2.29 .015 0.38 2X .040 1.02 WIDE TAB NOTE 3NOTE 2 NOTE 1 MATERIAL: BODY: STAINLESS STEEL PER AMS-5640 OR ASTM A582 ALLOY S30300, TYPE 303, CONDITION A. CONTACT: BERYLLIUM COPPER PER ASTM B196, ALLOY No. UNS C17300, TD04 INSULATOR: PTFE PER ASTM D1710, TYPE I, GRADE 1, CLASS B FINISH: BODY & CONTACT: GOLD PER ASTM B488, TYPE II, CODE C, CLASS .76 (.00003" MIN), OVER NICKEL PER AMS-QQ-N-290, CLASS 1, .00010" MIN. PERFORMANCE: IMPEDANCE: 50 OHMS FREQ. RANGE: DC TO 40.0 GHz INSUL. RES.: 5000 MEGOHMS, MIN. NOTES. Sn63 SOLDER REQUIRED IN CROSS HATCHED AREAS AS SHOWN.1. NO SOLDER ALLOWED IN INTERFACE.2. SOLDER SPLASH ALLOWABLE ON THIS FACE.3. CONNECTOR MUST BE FLUSH TO BOARD FOR OPTIMAL RF PERFORMANCE.4. PART TO BE SHIPPED WITH TAPE AND REEL.5. PRODUCT DATA DRAWING SV PART NUMBER INTERFACE 1211-60209 SMOOTH BORE 1211-60210 LIMITED DETENT 1211-60211 FULL DETENT APPROVEDDATE
REVISION HISTORY
1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 2) ALL DIMENSIONS ARE AFTER PLATING. 3) BREAK CORNERS & EDGES .005 R. MAX. 4) CHAM. 1ST & LAST THREADS. 5) SURFACE ROUGHNESS 63 e MIL-STD-10. 6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC WITHIN .005 T.I.R. 7) REMOVE ALL BURRS UNLESS OTHERWISE SPECIFIED 1211-60209-60211 www.svmicrowave.com TITLE: PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. SURFACE AREA: SHEET 1 OF 2 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL: 1/64 ANGULAR: X 1 0' X X' 15' DECIMAL: .X .030 .XX .010 .XXX .005 INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 FINISH: MATERIAL: B DWG. NO.SIZE SCALE: 16:1 SEE NOTES SEE NOTES N/A SMP MALE STRAIGHT PCB EDGE MOUNT
APPROVED: CHECKED: DRAWN: SEE SHEET 1 ROHS NON-COMPLIANT .164 MIN .200 2X ZERO CORNER BREAK: ENSURE ZERO TO NO RADIUS SO CONNECTOR SITS FLUSH TO FACE ENSURE EDGE OF BOARD DOES NOT INTERFERE WITH MATING CONNECTOR RECOMMENDED PCB MECHANICAL FOOTPRINT .164 MIN .200 APPROVEDDATE 1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 2) ALL DIMENSIONS ARE AFTER PLATING. 3) BREAK CORNERS & EDGES .005 R. MAX. 4) CHAM. 1ST & LAST THREADS. 5) SURFACE ROUGHNESS 63 e MIL-STD-10. 6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC WITHIN T.I.R. 7) REMOVE ALL BURRS UNLESS OTHERWISE SPECIFIED 1211-60209-60211 www.svmicrowave.com TITLE: PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. SURFACE AREA: SHEET 2 OF 2 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL: 1/64 ANGULAR: X 1 0' X X' 15' DECIMAL: .X .030 .XX .010 .XXX .005 INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 FINISH: MATERIAL: B DWG. NO.SIZE SCALE: 16:1 SEE NOTES SEE NOTES N/A SMP MALE STRAIGHT PCB EDGE MOUNT