1210 TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

SENSOR SOLUTIONS /// 1210 9/2015 Page 1 1210 Standard SPECIFICATIONS  PC Board Mountable Pressure Sensor  0-100 mV Output  Current Excitation  Gage, Absolute, and Differential  Temperature Compensated The 1210 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual- in-line configuration. It is intended for cost sensitive applications where excellent performance and long-term stability are required. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Gage, absolute, and differential pressure ranges from 0- 2 psi to 0-100 psi are available. Multiple lead and tube configurations are available for specific applications. Please refer to the 1210 1 psi datasheet for low pressure applications. For voltage excitation, please refer to the Model 1220.

SENSOR SOLUTIONS /// 1210 9/2015 Page 2

FEATURES

 Dual- in-Line Package  0ºC to 50ºC Compensated Temperature Range  ±0.1% Non Linearity  1.0% Interchangeable Span (provided by gain set resistor)  Solid State Reliability

APPLICATIONS

 Medical Instruments  Airspeed and Altitude Measurements  Process Control  Factory Automation  Vacuum Measurement  Handheld Calibrators STANDARD RANGES Range psia psid psig Port Styles 0 to 2   S, L, N, B* 0 to 5    S, L, N, B* 0 to 15    S, L, N 0 to 50    S, L, N 0 to 100    S, L, N *Barb port styles are only available in lead configuration type 3. See Ordering Information.

SENSOR SOLUTIONS /// 1210 9/2015 Page 3 PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Span 75 100 150 mV 1 Span (2 psi version) 30 60 mV 1 Zero Pressure Output -2 2 mV Pressure Non Linearity -0.1 ±0.05 0.1 %Span 2 Pressure Hysteresis -0.05 ±0.01 0.05 %Span Input & Output Resistance 2500 4400 6000 Ω Temperature Error – Span -0.5 ±0.3 0.5 %Span 3 Temperature Error – Zero -0.5 ±0.1 0.5 %Span 3 Thermal Hysteresis – Zero ±0.1 %Span 3 Supply Current 1.5 2.0 mA Response Time (10% to 90%) 1.0 mS 4 Output Noise (10Hz to 1kHz) 1.0 µV p-p Long Term Stability (Offset & Span) ±0.1 %Span 5 Pressure Overload 3X Rated 6 Compensated Temperature 0 50 °C Operating Temperature -40 +125 °C Storage Temperature -50 +150 °C Weight 3 grams Solder Temperature 250ºC Max 5 Sec. Media Non-Corrosive Dry Gases Compatible with Silicon, Pyrex, RTV, Gold, Ceramic, Nickel, and Aluminum Notes 1. Ratiometric to supply current. 2. Best fit straight line. 3. Maximum temperature error between 0°C and 50°C with respect to 25°C. For 2psi devices, Temperature Error -- Zero is ±1%. 4. For a zero- to-full scale pressure step change. 5. Long term stability over a one year period with constant current and temperature. 6. 2X maximum for 100psi device. 20psi maximum for 2 and 5p si devices. Application Schema

SENSOR SOLUTIONS /// 1210 9/2015 Page 4 DIMENSIONS

SENSOR SOLUTIONS /// 1210 9/2015 Page 5 BARB DIMENSIONS

SENSOR SOLUTIONS /// 1210 9/2015 Page 6 CONNECTIONS APPLICATION SCHEMATIC

SENSOR SOLUTIONS /// 1210 9/2015 Page 7

ORDERING INFORMATION

*Barb port styles are only available in lead configuration type 3.

1210 A - 015 G - 3 S

Type (G= Gage, A = Absolute, D = Differential) Lead Configuration (1, 3 - See Dimensions Diagram) Pressure Tubes (L = Long, S = Short, N = None, B = Barb) TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believe d to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligation s shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity Company

45738 Northport Loop West

Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com EUROPE Measurement Specialties (Europe), Ltd., a TE Connectivity Company

26 Rue des Dames

78340 Les Clayes-sous-Bois, France

Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com