1210-1PSI TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

SENSOR SOLUTIONS /// 1210 9/2015 Page 1 1210 1psi SPECIFICATIONS  PC Board Mountable Pressure Sensor  0-100 mV Output  Current Excitation  Gage and Differential  Temperature Compensated The 1210 1psi is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual- in-line configuration. It is intended for cost sensitive applications where excellent performance and long-term stability are required. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Please refer to the 1210 standard datasheet for information on products with operating pressures greater than 1psi. For voltage excitation, please refer to the Model 1220.

SENSOR SOLUTIONS /// 1220 9/2015 Page 2

FEATURES

 Dual- in-Line Package  1.0% Interchangeable Span (provided by gain set resistor)  ±0.3% Non Linearity  Solid State Reliability

APPLICATIONS

 Medical Instruments  Airspeed Measurement  Process Control  Factory Automation  Leak Detection STANDARD RANGES Range psid psig Port Styles 0 to 1   S, L, N, B* *Barb port styles are only available in lead configuration type 3. See Ordering Information.

SENSOR SOLUTIONS /// 1220 9/2015 Page 3 PERFORMANCE SPECIFICATIONS Supply Current: 1.5 mA Ambient Temperature: 25°C (unless otherwise specified) PRESSURE RANGE 0 – 1 psi PARAMETERS MIN TYP MAX UNITS NOTES Full Scale Output Span 50 100 150 mV 1 Zero Pressure Output (Offset) -2.0 2.0 mV Pressure Non Linearity -0.3 0.3 %Span 2 Pressure Hysteresis -0.1 ±0.01 0.1 %Span Input/Output Resistance 1800 6500 Ω Temperature Error – Span -1.0 ±0.5 1.0 %Span 3 Temperature Error – Zero -1.0 ±0.5 1.0 %Span 3 Thermal Hysteresis – Zero ±0.1 %Span 3 Long Term Stability (Offset & Span) ±0.2 %Span/year Supply Current 0.5 1.5 2.0 mA 4 Response Time (10% to 90%) 1.0 mSec 5 Output Noise 1.0 µV p-p 6 Output Load Resistance 2 MΩ 7 Insulation Resistance (50Vdc) 50 MΩ Pressure Overload 10 psi Operating Temperature -40 +125 °C Storage Temperature -50 +150 °C Media Non-Corrosive Dry Gases Compatible with wetted materials 8 Weight 3 grams Notes 1. Output span of unamplified sensor. 2. Best fit straight line. 3. Temperature range: 0°C to 50°C with reference to 25°C. 4. Guarantees input/output ratiometricity for span. 5. For a zero-to-full scale pressure step change. 6. 10Hz to 1kHz. 7. Prevents increase of TC-Span due to output loading. Wetted materials: glass, ceramic, silicon, fluorosilicone, nickel, gold and aluminum Additional Notes Soldering leads pins: 250°C for 5 seconds, maximum.

SENSOR SOLUTIONS /// 1220 9/2015 Page 4 DIMENSIONS (TUBE VERSION)

SENSOR SOLUTIONS /// 1220 9/2015 Page 5 DIMENSIONS (BARB VERSION)

SENSOR SOLUTIONS /// 1220 9/2015 Page 6 CONNECTIONS APPLICATION SCHEMATIC

SENSOR SOLUTIONS /// 1220 9/2015 Page 7

ORDERING INFORMATION

*Barb vent port style only available in lead configuration type 3. 1210A - 001 G - 3 S Model Pressure Range Type (G= Gage, D = Differential) Lead Configuration (1 = Same side as vent, 3 = Opposite side as vent) Vent (L = Long, S = Short, N = None, B = Barb) TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believe d to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligation s shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity Company

45738 Northport Loop West

Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com EUROPE Measurement Specialties (Europe), Ltd., a TE Connectivity Company

26 Rue des Dames

78340 Les Clayes-sous-Bois, France

Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com