DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Guardring for Stress Protection
  • Optimized for Very Low Forward V oltage
  • 125°C Operating Junction Temperature
  • Epoxy Meets UL 94 V−0 @ 0.125 in
  • Package Designed for Optimal Automated Board Assembly
  • ESD Ratings: Machine Model, C; Human Body Model, 3B
  • NRVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Mechanical Characteristics
  • Reel Options: MBR120VLSFT1G = 3,000 per 7″ reel/8 mm tape MBR120VLSFT3G = 10,000 per 13″ reel/8 mm tape
  • Device Marking: L2V
  • Polarity Designator: Cathode Band
  • Weight: 11.7 mg (approximately)
  • Case: Epoxy, Molded
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
  • Device Meets MSL 1 Requirements SCHOTTKY BARRIER RECTIFIER

1.0 AMPERES

20 VOLTS

http://onsemi.com Device Package Shipping †

ORDERING INFORMATION

MBR120VLSFT1G SOD−123FL (Pb−Free) 3000 / Tape & Reel MBR120VLSFT3G SOD−123FL (Pb−Free) 10000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. SOD−123FL CASE 498L2VM/C0071 /C0071 MARKING DIAGRAM L2V = Specific Device Code M = Date Code /C0071 = Pb−Free Package (Note: Microdot may be in either location) NRVB120VLSFT1G SOD−123FL (Pb−Free) 3000 / Tape & Reel

MBR120VLSF, NRVB120VLSF http://onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 20 V Average Rectified Forward Current (Rated VR) TL = 119°C IF(AV) 1.0 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz) IFSM 45 A Storage Temperature Range Tstg −65 to +125 °C Operating Junction Temperature TJ −65 to +125 °C Voltage Rate of Change (Rated VR) dv/dt 1000 V//C0109s Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance − Junction−to−Lead (Note 1) Thermal Resistance − Junction−to−Lead (Note 2) Thermal Resistance − Junction−to−Ambient (Note 1) Thermal Resistance − Junction−to−Ambient (Note 2) Rtjl Rtjl Rtja Rtja 325 °C/W 1. Mounted with minimum recommended pad size, PC Board FR4. 2. Mounted with 1 in. copper pad (Cu area 700 mm 2).

ELECTRICAL CHARACTERISTICS

Characteristic Symbol TJ = 25/C0053C TJ = 85/C0053C Unit Maximum Instantaneous Forward Voltage (Note 3) (IF = 0.1 A) (IF = 0.5 A) (IF = 1.0 A) VF 0.275 0.315 0.340 0.205 0.270 0.300 V Maximum Instantaneous Reverse Current (Note 3) (Rated DC Voltage) IR 0.60 15 mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width = 300 /C0109s, Duty Cycle ≤ 2%.

MBR120VLSF, NRVB120VLSF http://onsemi.com PACKAGE DIMENSIONS SOD−123FL CASE 498 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH. 4. DIMENSIONS D AND J ARE TO BE MEASURED ON FLAT SECTION OF THE LEAD: BETWEEN 0.10 AND 0.25 MM FROM THE LEAD TIP. D E b A L c POLARITY INDICATOR OPTIONAL AS NEEDED ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* DIM A MIN NOM MAX MIN MILLIMETERS 0.90 0.95 0.98 0.035 INCHES A1 0.00 0.05 0.10 0.000 b 0.70 0.90 1.10 0.028 c 0.10 0.15 0.20 0.004 D 1.50 1.65 1.80 0.059 E 2.50 2.70 2.90 0.098 L 0.55 0.75 0.95 0.022 0.037 0.039 0.002 0.004 0.035 0.043 0.006 0.008 0.065 0.071 0.106 0.114 0.030 0.037 NOM MAX − −0° 8° 0° 8° /C0113 /C0113 /C0113 TOP VIEW BOTTOM VIEW SIDE VIEW HE END VIEW RECOMMENDED DIMENSIONS: MILLIMETERS 1.25 4.20 1.222X PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 MBR120VLSFT1/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.