12024 ARIES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

2609 Bartram Road • Bristol, PA 19007-6810 USA

TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM 12024 Rev. 7.2 1 of 2 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLECT SOCKETS w/SURFACE MOUNT PINS, SEE DATA SHEET 12023 FOR COLLET SOCKET w/WIRE WRAP PINS, SEE DATA SHEET 12025 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS

FEATURES

  • Rugged, Solderable Socket with a Unique Ejector/Latch for Fast In-field Board Maintenance
  • Latch Locks-in Connector or Device for High-vibration Environments
  • Ejector/Latch removes DIP Packages without Damage GENERAL SPECIFICATIONS
  • LATCH & BODY: Black UL-94V-0 Glass-filled 4/6 Nylon
  • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05
  • PIN BODY PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 –OR– 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B
  • 6-FINGER COLLECT CONTACTS: BeCu per UNS C17200 ASTM B194-08
  • CONTACT PLATING: 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 –OR– 10µ [0.25µ] min. Au per MIL- G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B. Heavy 30µ [0.76µ] Au plating on contacts also available.
  • CONTACT CURRENT RATING: 3 amps
  • INSULATION RESISTANCE: 10,000 MΩ at 500VDC
  • WITHSTANDING VOLTAGE: 1000Vrms
  • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] for Sn plating; -67°F to 257°F [-55°C to 125°C] for Au plating
  • INSERTION FORCE: 67g/pin, based on 0.018 [0.46] dia. test lead
  • WITHDRAWAL FORCE: 30g/pin, based on 0.018 [0.46] dia. test lead
  • NORMAL FORCE: 45g/pin, based on 0.018 [0.46] dia. test lead MOUNTING CONSIDERATIONS EJECT-A-DIP Lock/Eject DIP Socket w/Collet Contacts & Solder Pin Tails

ORDERING INFORMATION

H = Heavy Au Collet T = Sn Collet & Shell TL = Sn/Pb Collet & Shell Plating 0 = Au Collet, Sn Shell 0TL = Au Collet, Sn/Pb Shell 1 = Au Collet & Shell Termination 1 = Solder Pin Tail Dim. “H” (See Table) No. of Pins (See Table)

TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM 12024 Rev. 7.2 2 of 2 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLECT SOCKETS w/SURFACE MOUNT PINS, SEE DATA SHEET 12023 FOR COLLET SOCKET w/WIRE WRAP PINS, SEE DATA SHEET 12025 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS EJECT-A-DIP Lock/Eject DIP Socket w/Collet Contacts & Solder Pin Tails No. of pins Catalog No. Dim. "A" Dim."B" Centers "C"