1201 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Servo Model / Ball Bearing
  • 7/8” to 3” Diameter Servo Mount
  • Wirewound Single-Turn Precision Potentiometers 1201 1301 1501 1601 1701 1801 Actual Electrical Travel 354°±2° 354°±1° 356°±1° 358°±1° Normal Resistance Range 100Ω to 25K 100Ω to 30K 100Ω to 50K 100Ω to 60K 100Ω to 75K 100Ω to 100K Extended Resistance Range (1) 15Ω to 75K 25Ω to 100K 25Ω to 125K 25Ω to 150K 25Ω to 200K 25Ω to 250K Resistance Tolerance: Standard % ±3 Best Practical % ±1 Power Rating At 70°C, Derating to 0 At Linearity, Independent, Tolerance, Standard Equivalent Noise Resistance (ENR) Max. (Ohms) 100 End Voltage Max. (% Of Total Applied Voltage) Within linearity tolerance Insulation Resistance At 500 VDC, Min. (Megohms) 1000 Dielectric Withstanding Voltage (Volts RMS) 1000 Max. Applied Voltage(Volts DC)(2) 400 Temperature Coefficient Of Potentiometer, Max. % / °C ±.007

www.sensata.com Page 2 Copyright © 2017 Sensata Technologies, Inc. DIMENSIONS Mechanical Environmental 1201 1301 1501 1601 1701 1801 Total Mechanical Travel 360° Continuous Mechanical Life, Shaft Revolutions 2 million Ganged Cups, Max. (Number) 6 8 Taps, Max., Excluding End Terminations 9 19 24 26 41 Pilot Diameter Runout, Max. .0015 Lateral Runout, Max. .0015 .002 .003 Shaft Runout, Max. .001 Shaft Radial Play, Max .002 Shaft End Play, Max .004 Temperature Range (°C) Standard -55 to + 125 ALL MODELS are manufactured to meet or exceed applicable characteristics of MIL-R-12934. For MILITARY-APPROVED (QPL) Listenings. A C D .062 ØF ØG ØH RL 2X K RJ ØE B TOLERANCES UNLESS OTHERWISE SPECIFIED: FRACTIONAL: ±1/64" DECIMAL: ±.005" ANGULAR: ±1° Dimensions are in in

Specification No.: DUNCAN BROCHURE Rev.01/11/18 Americas +1 (800) 350 2727 sensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 www.sensata.com CONTACT US Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. DIM / SERVO MODEL 1201 1301 1501 1601 1701 1801 C .062 .073 MIN. D .062 .093 J R5/8 MAX R23/32 MAX R29/32 MAX R1-1/16 MAX R1-3/16 MAX R1-11/16 MAX K 30° 20° 16° 15° 9° L R9/16 MAX R43/64 MAX R59/64 MAX R1-5/64 MAX R1-13/64 MAX R1-45/64 MAX (1) All specifications listed apply to units with a total resistance within the normal resistance range. Higher or lower resistances may require some degradation of listed specifications because of resistance wire composition or size (2) Not to exceed specified power rating. TEMPERATURE (°C) % RATED POWER 130°70° 50% 120° Notes: