1200 APEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

  • Case : polyamide
  • Plunger : polyamide
  • Bushing : brass, nickel plated
  • Contacts : A : silver C : copper, silver plated APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. MATERIALS
  • Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut
  • Panel thickness : 5 mm (.196) max.
  • Total travel :
  • Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F) GENERAL SPECIFICATIONS
  • Max. current/voltage rating with resistive load : - silver contacts (A) : 4 A 250 VAC - 8 A 125 VAC - 4 A 24 VDC - 8 A 12 VDC - silver plated copper contacts (C) :

2 A 250 VAC - 3 A 125 VAC - 2 A 24 VDC - 3 A 12 VDC

  • Initial contact resistance : 10 mΩ
  • Insulation resistance : 1,000 MΩ min. at 500 VDC
  • Dielectric strength : 2,000 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and frame
  • Electrical life : 10,000 cycles at full load ELECTRICAL SPECIFICATIONS Butt action contacts Double break NF (EN 61058-1), UL and CSA approved DISTINCTIVE FEATURES 1200 series Momentary pushbutton switches • round plunger The company reserves the right to change specifications without notice. PANEL SWITCHES SW-1200-1808
  • Panel cut-out : Ø 12.2 (.480)

2 A 250 VAC or 4 A 250 VAC,

T55/125 °C All models

4 A 250 VAC - 8 A 125 VAC

All models function 3 (NO) EN 61058-1 Models 1233X209 and 1233X209L are standard marked NF. To order switches marked NF, UL or CSA, complete appropriate box of ordering format. AGENCY APPROVALS Momentary pushbutton switches • round plunger 1200 series TERMINALS ELECTRICAL FUNCTIONS KEYWAY NO (function 3) NC (function 2) 9.20 6.35x0.80 (.362) (.25x.031) (.122DIA) Ø3.10 4.50 (.177) 9.20 6.35x0.80 (.362) (.25x.031) (.059DIA) Ø.50 4.50 (.177) (.25) 6.35 9.20 0.80 Ø3.00x0.50 (.118DIAx0.50) (.031) (.362) (.283) (.031) (.118DIAx0.50) Ø3.00x0.50 0.80 7.20 6.35 (.25) Solderlug / quick-connect. Normalized quick-connect Screw Screw + clamp PANEL SWITCHES

2 Normally closed

3 Normally open

1 Solder lug and quick-connect

2 Screw

3 Normalized quick-connect

0 Screw terminal + clamp

0.-7 Right angle screw terminals + clamp TERMINALS BUILD YOUR PART NUMBER 1200 series Momentary pushbutton switches • round plunger OPTIONS A Silver C Copper, silver plated CONTACT MATERIALS X209 NF standard marked, silver contacts X209L NF standard marked, silver contacts, long plunger SPECIAL MODELS

2 Black

3 Green

6 Red

models. ABOUT THIS SERIES Notice : please note that not all combinations of above numbers are available. Refer to following pages for further information. Sealing boots are available to protect the switches against dust and water. See "Sealing Boots" section of website. Mounting accessories : standard hardware supplied : - silver contact models : 1 hex nut U166 and 1 knurled nut U411 - copper contact models : 1 hex nut U42 and 1 knurled nut U411 Standard and special hardware is presented in the “Hardware“ section of website. On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. PANEL SWITCHES

10.5012.00 (.413)(.472)(.315) 8.00 14.00 (.551) 17.00 (.519)(.669) 13.20 Ø12.00x0.75 SI (.472DIAx0.75 IS) (.295) 7.50 (.315DIA) Ø8.00 1.00 (.039) SCREW TERMINALS NORMALIZED QUICK-CONNECT TERMINALS STRAIGHT SCREW TERMINALS + CLAMP (.669) 17.00 7.50 (.295) (.472DIAx0.75 IS) ø12.00x0.75 SI 6.35x0.80(.519) (.25x0.031) (.551) 14.00 13.20 (.039) 1.00 (.472) 12.00 (.362) 9.20 (.413) 10.50 ø8.00 (.315DIA) (.059DIA) ø1.50 (.472DIAx0.75 IS) Ø12.00x0.75 SI (.551) 14.00 (.315DIA) Ø8.00 (.472) (.413) 12.00 10.50 (.519) (.669) 13.20 17.00 (.25x.031) 6.35x0.80 (.283) 7.20 (.295) 7.50 (.039) 1.00 Plunger height : NO model : 7.50 mm, NC model : 5.80 mm Plunger height : NO model : 7.50 mm, NC model : 5.80 mm Plunger height : NO model : 7.50 mm, NC model : 5.80 mm Plunger height : NO model : 7.50 mm, NC model : 5.80 mm SOLDER LUG/QUICK-CONNECT TERMINALS (.25x0.031) 13.20 (.551) (.669) (.472DIAx0.75 IS) 9.20 12.00 10.50 14.00 6.35x0.80(.519) 17.00 Ø12.00x0.75 SI 7.50 (.295) (.039) 1.00 Ø8.00 (.315DIA) Momentary pushbutton switches • round plunger 1200 series KEYWAY KEYWAY KEYWAY KEYWAY Normally Closed Normally Open 1212 1213 Normally Closed Normally Open 1222 1223 Normally Closed Normally Open 1232 1233 Normally Closed Normally Open 1202 1203 PANEL SWITCHES

Momentary pushbutton switches • round plunger RIGHT ANGLE SCREW TERMINALS + CLAMP KEYWAY Normally Open1203-7 Ø12.00x0.75 SI (.472DIAx0.75 IS) 7.00 (.275) 6.35x0.80 (.25x.031) 10.5012.00 (.413)(.472) Ø8.00 (.315DIA) 14.00 (.551) 7.50 (.295) (.826) 90˚ 21.00 1.00 (.039) CONTACT MATERIALS BASIC P/N A Silver C Copper, silver plated FINISH BASIC P/N LUXE Chrome plated cap nut U117 instead of knurled nut U411 PLUNGER COLORS BASIC P/N X209 NF standard marked - Silver contacts - short plunger X209L NF standard marked - Silver contacts - long plunger See drawings next page. NOTE : Ground connector U187 compulsory on models X209 and X209L if the panel is not metallic or not connected to ground. Order separately : see “Hardware“ section of website. PANEL SWITCHES

(CONTINUED) BASIC P/N Momentary pushbutton switches • round plunger 1200 series Replace • with the desired plunger color. Replace • with the desired plunger color. KEYWAY KEYWAY Normally Open1233A•X209 OPTION X209 OPTION X209L Normally Open1233A•X209L 10.5012.009.20 (.413)(.472)(.362) Ø8.00 (.315DIA) 6.35x0.80 14.00 (.551) (.25x0.031) (.519) 13.20 17.00 (.669) Ø12.00x0.75 SI (.472DIAx0.75 IS) (.295) 7.50 (.039) 1.00 (.511) 13.00 (.25x0.031) 6.35x0.80 9.20 (.362) 10.5012.00 (.413)(.472) Ø12.00x0.75 SI (.472DIAx0.75 IS) 14.00 (.551) (.519) 13.20 17.00 (.669) Ø8.00 (.315DIA) 1.00 (.039) AGENCY APPROVALS BASIC P/N NF All models UL-CSA All models function 3 (NO), including X209 and X209L Marking : to order switches marked NF, UL or CSA, complete above box with desired approvals. PANEL SWITCHES