11DQ06TR

11DQ05 IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

SCHOTTKY RECTIFIER 1.1 Amp 11DQ05 11DQ06 Bulletin PD-2.288 rev. E 03/03 1www.irf.com Dimensions in millimeters and inches Conform to JEDEC Outline DO-204AL (DO-41) CASE STYLE AND DIMENSIONS Major Ratings and Characteristics IF(AV) Rectangular 1.1 A waveform VRRM 50/60 V IFSM @ tp = 5 µs sine 150 A VF @ 1 Apk, TJ = 125°C 0.53 V TJ range - 40 to 150 °C Characteristics 11DQ.. Units The 11DQ.. axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, convert- ers, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Description/ Features

11DQ05, 11DQ06 Bulletin PD-2.288 rev. E 03/03 2 www.irf.com VR Max. DC Reverse Voltage (V) 50 60 VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings VFM Max. Forward Voltage Drop 0.58 V @ 1A * See Fig. 1 (1) 0.76 V @ 2A

0.53 V @ 1A

0.64 V @ 2A

IRM Max. Reverse Leakage Current 1.0 mA T J = 25 °C * See Fig. 2 (1) 11 mA T J = 125 °C CT Typical Junction Capacitance 55 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/µs (Rated VR) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% TJ Max. Junction Temperature Range (*) -40 to 150 °C Tstg Max. Storage Temperature Range -40 to 150 °C RthJA Max. Thermal Resistance Junction 100 °C/W DC operation to Ambient Without cooling fin RthJL Typical Thermal Resistance Junction 81 °C/W DC operation (See Fig. 4) to Lead wt Approximate Weight 0.33(0.012) g (oz.) Case Style DO-204AL(DO-41) Thermal-Mechanical Specifications Part number 11DQ05 11DQ06 Parameters 11DQ.. Units Conditions Parameters 11DQ.. Units Conditions IF(AV) Max. Average Forward Current 1.1 A 50% duty cycle @ T C = 84°C, rectangular wave form * See Fig. 4 IFSM Max. Peak One Cycle Non-Repetitive 150 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 6 25 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 2.0 mJ T J = 25 °C, IAS = 1 Amps, L = 4 mH IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Absolute Maximum Ratings Following any rated load condition and with rated VRRM applied A Parameters 11DQ.. Units Conditions < thermal runaway condition for a diode on its own heatsink (*) dPtot 1 dTj Rth( j-a)

11DQ05, 11DQ06 Bulletin PD-2.288 rev. E 03/03 3www.irf.com Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 1 - Maximum Forward Voltage Drop Characteristics Forward Voltage Drop - VFM (V) Instantaneous Forward Current - IF (A) Reverse Voltage - VR(V) Reverse Current - IR(mA) Reverse Voltage - VR (V) Junction Capacitance - CT (pF) 0.1 T = 150˚C T = 125˚C T = 25˚C J J J 100 0 1 02 03 04 05 06 07 0 T = 25˚CJ 0.0001 0.001 0.01 0.1 100 0 1 02 03 04 05 06 07 0 125˚C 25˚C T = 150˚CJ

11DQ05, 11DQ06 Bulletin PD-2.288 rev. E 03/03 4 www.irf.com Fig. 5 - Forward Power Loss CharacteristicsFig. 4 - Maximum Ambient Temperature Vs. Average Forward Current, Printed Circuit Board Mounted Fig. 6 - Maximum Non-Repetitive Surge Current Average Forward Current - IF(AV) (A) Allowable Case Temperature (°C) Average Power Loss (Watts) Average Forward Current - IF(AV) (A) Square Wave Pulse Duration - tp (microsec) Non-Repetitive Surge Current-I FSM (A) 100 1000 10 100 1000 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 0.2 0.4 0.6 0.8 DCRMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 100 120 140 160 DC Square wave (D = 0.50) 80% Rated Vr applied see note (2)

11DQ05, 11DQ06 Bulletin PD-2.288 rev. E 03/03 5www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. Ordering Information Table Device Code 1 52 43 1 - 11 = 1.1A (Axial and small packages - Current is x10) 2 - D = DO-41 package 3 - Q = Schottky Q.. Series 4 - 10 = Voltage Ratings 5 - TR = Tape & Reel package ( 5000 pcs) - = Box package (1000 pcs)

11 D Q 06 TR

06 = 60V 05 = 50V