11670 ATOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

10W LED COB Adjustable & Fixed head with dimmable driver Avail. In small, fixed & adjustable versions Supplied with dimmable LED driver Low-glare UGR 19 rating Ideal for commercial, retail, showroom and decorative

ORDERING INFORMATION

Description 10W LED COB Downlight w/Dimm Driver - 50Deg beam - 70mm cut-out - White - TRI CCT Driver Type Dimmable ( Phase cut) Item Code AT9029/SML/WH/TRI EFFICIENCIES Total System Efficiency 89 lm/W The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system. MECHANICAL Adjustability Fixed Body Material Aluminium Diffuser Material Glass Product Finish Powdercoated Fitting Colour White IC Rating IC-4 IC-4 rating has been conducted at the products maximum working Temperature Range (C) in line with Australian standards. This provides the required safety when covered with insulation and used in Australian Environments. Installation Type Recessed IP Rating IP54 Front Face Only ELECTRICAL Electrical Rating Class II Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Switch Type Inline System Max Wattage 10 W Working Temp Range -20 to 40 °C LAMP Macadam Steps (SDCM) 5-step MacAdam Ellipse Beam Angle 50 ° CCT Configuration TRI-CCT Colour Rendering Index (CRI) >80 Lamp/LED Current 230 mA Lamp/LED voltage 36 V UGR <16 LED LIFETIME Ambient Temp (°C) 25 °C 40 °C L80B10 >55000 hrs >55000 hrs This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. 1300 438 658 sales@evolt.com.au atomlighting.com.au © 2025 Evolt Generated on 22nd of January 2025 23:18:59 - Page 1

After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. TM-21 Test Hours 10000 hrs COLOUR TEMPERATURE Warm White (3000 K) 800 lm Cool White (4000 K) 890 lm DayLight (5000 K) 850 lm DRIVER Dimmable Yes Driver Included Yes Integrated Driver No Driver Type Dimmable ( Phase cut) Wiring Type Re-wireable Flex & Plug (2 pin) COMPLIANCE Daily Use 12 hrs The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally. Standards AS/NZS 60598.1 AS/NZS 60598.2.2 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 WARRANTY Domestic Use Warranty 3 RTB (Total 3 Years) VIP Warranty 2 Onsite, 3 RTB (Total 5 Years) VIP warranty is available to registered users and is subjected to additional terms and conditions. DIMENSIONS Cutout 70 mm Product Diameter 80 mm Product Height 95 mm LINE DRAWINGS AT9029/SML/TRI Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 22nd of January 2025 23:18:59 - Page 2

Order code Item Code Description 14927 DK1-0AABBHZX00025 Driver Kit - Wireless DALI+ LED driver with 1.2m 2 core flex and plug - set to 250mA 14909 DK1-0AADADZX00025 Driver Kit - DALI-2 LED driver with 1.2m 2 core flex and plug and 2 core flying lead - set to 250mA Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 22nd of January 2025 23:18:59 - Page 3