1132-6116 SVMICROWAVE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
- NRN 45702 03/21 A DCN 50734 05/21 APPROVED: CHECKED: DRAWN: SEE PDM SEE PDM JPM 03/26/21 .371 9.42 .097 2.46 .135 3.43 .205 5.21 SMPM SMOOTH BORE SMPM FULL DETENT RP RP .195 4.95 NOTE 3 MATERIAL: BODIES: STAINLESS STEEL PER AMS-5640, ALLOY UNS S30300, TYPE 1; OR ASTM A582 TYPE 303, COND. A CONTACT: BERYLLIUM COPPER PER ASTM B196, ALLOY No. UNS C17300, TD04 INSULATOR: PTFE PER ASTM D1710, TYPE I, GRADE 1, CLASS B FINISH: BODY: PASSIVATED PER AMS-2700 CONTACT: GOLD PER ASTM B488, TYPE II, CODE C, CLASS 1.27, OVER NICKEL PER AMS-QQ-N-290, CLASS 1, .00005" MIN. PERFORMANCE: IMPEDANCE: 50 OHMS FREQ. RANGE: DC TO 40.0 GHz PRODUCT DATA DRAWING NOTES: FOR USE IN 9311-60220, 9311-60221, OR SIMILAR PLUG-IN MODULES.1. WILL FIT INTO, BUT NOT RECOMMENDED FOR USE WITH, SF9311-60097, 2. SF9311-60147, OR SIMILAR PLUG-IN MODULES. FRONT PLATE OF THESE MODULES WILL NOT SUFFICIENTLY HOLD THIS CONTACT RADIALLY. ASSEMBLE ADAPTER IN PLUG-IN MODULE AS SHOWN, PLUG-IN MODULE 3. SOLD SEPARATELY. APPROVEDDATE
REVISION HISTORY
1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 2) ALL DIMENSIONS ARE AFTER PLATING. 3) BREAK CORNERS & EDGES .005 R. MAX. 4) CHAM. 1ST & LAST THREADS. 5) SURFACE ROUGHNESS 63 e MIL-STD-10. 6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC WITHIN .005 T.I.R. 7) REMOVE ALL BURRS UNLESS OTHERWISE SPECIFIED 1132-6116 www.svmicrowave.com TITLE: PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. SURFACE AREA: SHEET 1 OF 1 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL: 1/64 ANGULAR: X 1 0' X X' 15' DECIMAL: .X .030 .XX .010 .XXX .005 INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 FINISH: MATERIAL: B DWG. NO.SIZE SCALE: 12:1 SEE NOTES SEE NOTES N/A SMPM M SB TO SMPM M FD ADAPTER FOR VITA 67.3 PLUG-IN MODULE SEE PDM