112CP SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Pressure and temperature measurement in one package
  • Fast, in-stream temperature measurement
  • Precise superheat measurement The 112CP series combined pressure and temperature sensors delivers the benefit of both pressure and instream temperature sensing in a single, robust integrated package. Sensata Technologies has been a leading global supplier of pressure sensors and switches for over 50 years.
  • Air conditioning & refrigeration
  • Alternative energy management
  • Engine controls & monitors
  • Compressors & pumps Pressure Ranges 0 to 150 psi through 0 to 650 psi Pressure Accuracy ±0.8% F.S. (linearity, hysteresis, repeatability and calibration) Total Error Band ±1.7% F.S. (0°C to +85°C) Proof Pressure ≥ 2X Burst Pressure ≥ 3X Temperature Accuracy ±1% (delta R/R) Resistance @ 25°C 10K or 100 ohms Operating Temperature -40°C to 135°C Suppy Voltage (VCC) 4.5 to 5.5 VDC Output Voltage 0.5 to 4.5 VDC Supply Current 0.5 to 4.5 VDC Output Current 8.0 mA Output Load Range 10K to 50K ohms Overvoltage Protection 16 VDC Reverse Voltage Protection -14 VDC Output Response Time 10mS

www.sensata.com Page 2 Copyright © 2024 Sensata Technologies, Inc. Cycle Life ≥ 1M cycles Vibration 5g Drop (any Axis) 1m Electrical Connection 4 pin AMP Micro-Quadlok System™ connector Weight 1.5 oz max *Refer to chart for seal compatibility NOTE: Not suitable for use in conductive media Micro-Quadlok System is a trademark of Tyco Electronics Corporation DIMENSIONS STANDARD OFFERINGS PRESSURE OUTPUT (V OUT ) GROUND (GND)6˚ REF. M12 x 1.25 - 6g THREAD O-RING 2.56 [65.02 ] MAX 0.720 [18.29 ]Ø 0.394 [10.0]Ø 0.104 ± 0.004 [2.64 ] ± 0.10 0.366 ± 0.004 [9.3 ] ± 0.10 0.764 ± 0.004 [19.4 ] ± 0.10 TEMPERATURE OUTPUT (R OUT ) POWER (V IN ) Pressure Connections M12 x 1.25 - 6g plated steel 1/4" NPT male brass Pressure References Absolute Sealed gage Pressure Ranges 9 to 149 psia 26.8 to 510 psia Elastomer Seals See Seal Compatibility Guide

Rev.01/03/24 Americas +1 (800) 350 2727 sensors@sensata.com switches@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 pressure-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 www.sensata.com CONTACT US Copyright © 2024 Sensata Technologies, Inc. Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA ORDERING OPTIONS AGENCY & CERTIFICATIONS Seal Material Media Compatibility Max Seal Temperature Range Nitrile (BUNA-N, NBR) Petroleum oils, lubricants, detergent solutions, helium -20°C to 100°C HNBR (Hydrogenated Nitrile) Petroleum oils, lubricants, detergent solutions -20°C to +135°C Ethylene Propylene Steam, soaps, polar solvents, brake fuilds, acetone, Skydrol™ -40°C to +135°C Fluorosilicone Chlorinated solvents, oils, fuels, air -40°C to +135°C Neoprene Refrigerants (freons/ammonia) -40°C to +120°C Fluorocarbon (Viton™) Fertilizers, freons, butanes, oils, trichlorethylene -35°C to +135°C SEAL COMPATIBILITY GUIDE Part Number Pressure Pressure Connection Thermistor Internal Seal Thread O-Ring 112CP3-4 9 to 149 psia M12 x 1.25 - 6g plated steel 10k Ohm @ 25°C Neoprene Neoprene 112CP3-6 9 to 149 psia 1/4” NPT male brass 10k Ohm @ 25°C Nitrile — 112CP3-8 26.8 to 510 psia M12 x 1.25 - 6g plated steel 10k Ohm @ 25°C Neoprene Neoprene 112CP3-9 26.8 to 510 psia 1/4” NPT male brass 10k Ohm @ 25°C Nitrile — RoHS, REACH available