11219 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Advanced IP65 Weatherproof Batten, Dual Power, Tri-CCT Tri-colour selection IP65 weatherproof rating and IK08 impact rating Selectable output power Exclusive 5 year warranty Increased lumen efficiency >60000h L70 or 42000h L80 led lifetime at 40 degrees Increased ambient temperature of 40 degrees 8 year product design life
ORDERING INFORMATION
Description UMBRA Advanced 1200mm LED wide body batten - Tri-CCT Driver Type Fixed output Item Code EV-UMBRA-ADV-IP65-1200-TRI EFFICIENCIES Total System Efficiency 118 lm/W The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system. MECHANICAL Body Material Polycarbonate Diffuser Material Polycarbonate Fitting Colour Grey IK Rating IK08 Installation Type Surface mount IP Rating IP65 ELECTRICAL Electrical Rating Class I Input Current 0.2 A Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 36 W Power Factor 0.9 Switch Type Inline Working Temp Range -20 to 40 °C LAMP Macadam Steps (SDCM) 4-step MacAdam Ellipse CCT Configuration TRI-CCT Colour Rendering Index (CRI) >80 Lamp/LED Current 800 mA Lamp/LED voltage 42 V 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 29th of January 2025 00:30:32 - Page 1
LED Lifetime >60000 hrs This is the Reported LED Lifetime in Hours based on TM-21. Ektor does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below. Ambient Temp (°C) 25 °C 40 °C L70B10 >60000 hrs >60000 hrs This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. TM-21 Test Hours 10000 hrs COLOUR TEMPERATURE
20 Watts
4000 K >2150 lm
5000 K >2200 lm
6500 K >2100 lm
36 Watts
4000 K >4100 lm
5000 K >4250 lm
6500 K >4000 lm
Driver Mode Constant Current Driver Type Fixed output Wiring Type Re-wireable terminal block (3 pin) PSTLM 0.1 Short Term Light Modulation (PstLM): The requirement is that PstLM should be less than or equal to 1.0. This metric measures the short-term flicker severity and ensures that flicker is not perceptible or is at a level that does not cause discomfort or health issues. SVM 0.4 Stroboscopic Visibility Measure (SVM): The requirement for SVM is that it should be less than or equal to 0.4. The SVM metric assesses the visibility of the stroboscopic effect, which can make moving objects appear to be stationary or moving in discrete steps, thus ensuring that this effect is minimized in lighting environments to prevent visual discomfort and safety hazards. ENERGY SAVINGS SCHEME Ipart Approval Yes REES Approval Yes VEU Approval Yes COMPLIANCE Product Design Life 8 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Daily Use 16 hrs The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally. Standards AS/NZS 60598.1 AS/NZS 60598.2.1 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 WARRANTY Commercial Use Warranty 5Y return to base on General lighting components First 2Y includes an exclusive onsite warranty VIP Warranty 2 Onsite, 3 RTB (Total 5 Years) VIP warranty is available to registered users and is subjected to additional terms and conditions. Warranty Operating Hours 25000 hrs This product is provided with a warranty up until the stated warranty period or until the stated warranty operating hours has been reached (whichever occurs first). DIMENSIONS Product Height 93 mm Product Length 1230 mm Product Width 130 mm LINE DRAWINGS Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 29th of January 2025 00:30:32 - Page 2
EV/UMBRA/ADV/IP65/1200 (Full Power / 6500K) EV/UMBRA/ADV/IP65/1200 (Full Power / 4000K) EV/UMBRA/ADV/IP65/1200 (Half Power / 6500K) EV/UMBRA/ADV/IP65/1200 (Full Power / 5000K) EV/UMBRA/ADV/IP65/1200 (Half Power / 5000K) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 29th of January 2025 00:30:32 - Page 3
EV/UMBRA/ADV/IP65/1200 (Half Power / 4000K) ACCESSORIES Order code 12404 Description Plastic Clips (10) Kit for Umbra ADV and PRO Battens Item Code CLIPS-AT9890-96/P Order code 11465 Description UMBRA Advanced and Pro vandal resist SS316 clips/screw/allen key- kit (10 pack) Item Code EV-SS316-WP-CLIPS Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 29th of January 2025 00:30:32 - Page 4