11177980

JS1 DANFOSS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Features

• Hall effect with two sensors per axis or long life potentiometer position sensing
• Simultaneous operation of two proportional rollers
• Operator Presence switch Options Axis
• Dual Axis Spring Return
• Single Axis Spring Return
• Single Axis with Friction
• Dual Axis with one axis Spring, one axis Friction Output options
• CAN J1939
• CANopen
• PVE
• CANalog
• CAN+
• Analog Category 1
• Analog Category 3
• PWM (programmable) Ergonomic grip
• Right hand
• Left hand
• Ambidextrous (used with either the left or right hand) On axis shaft, deflection
• ±18° JS1-H grips
• HR1
• ST2
• ST7
• PR2
• PR7 Comprehensive technical literature is online at www.danfoss.com Data Sheet Joystick JS1 Heavy Duty Joysticks © Danfoss | March 2019 AI00000239en-000901 | 1

Dimensions in millimeters [inches] 10.00 [0.39] 68.80 [2.71] Ø 72.60 [2.86] 150.00 [5.90] 145.00 [5.73] 18° 18° Ø 6.00 [0.24] 45.00 [1.77] 90.00 [3.54] 18° 18° Ø 75.80 [2.98] 10.00 [0.39] 68.80 [2.71] 68.80 [2.71] 10.00 [0.39] Ø 75.80 [2.98] 18 18° 166.00 [6.55] 190.00 [7.48] HR1 ST2 PR2 ST7 PR7 190.00 [7.48 ] 18° 18° Ø 75.80 [2.98] 10.00 [0.39] 68.80 [2.71] Ø 72.60 [2.86] 10.00 [0.39] 68.80 [2.71] Ø 72.60 [2.86] 195.20 [7.69] 18°18°1 143.00 [5.63] 43.70 [01.72] 1. Bottom view 2. Cable harness (included) based on specific options, see JS1 Heavy Duty Joysticks Technical Information, BC00000347 Spring return, base only Breakout load on axis Friction hold, base only Friction level Friction Center detent A Low friction-Low detent 0.8 Nm 1.5 Nm B Low friction-High detent 0.8 Nm 2.0 Nm C High friction-High detent 1.6 Nm 3.0 Nm Friction hold/Spring return, base only Friction level Spring type E A Standard J A Heavy Data Sheet JS1 Heavy Duty Joysticks 2 | © Danfoss | March 2019 AI00000239en-000901

Mechanical characteristics Shaft mechanical angle limits ± 18˚ Base mechanical life Single axis with friction = 1 million full operating cycles Single axis and dual axis with spring return = 2.0 million full operating cycles Dual axis with spring in one axis, friction in one axis = 1 million full operating cycles Maximum force on handle 1000 N Maximum torque 15 Nm Base only mass 0.75 kg (1.65 lbf) Weight (base without grip) 725 G (1.8 lb) Vertical maximum load 2500 N (560 lbs) Electrical—PVE (Standard and Extended) characteristics Supply voltages U DC 9 to 36 VDC Maximum current consumption 8 A Current consumption, no load 150 mA Maximum load for push buttons and directional switches for all proportional functions 0.6 A Neutral position switch 3 A Sensor type Hall effect with redundant sensors Potentiometer Signal voltage US Minimum to maximum 0.25 to 0.75 Neutral position 0.50 Signal load in neutral position Load type PVE Other Load impedance >6 kΩ >15 kΩ Signal current at maximum movement U DC = 12 V 6 kΩ 15 kΩ ± 0.6 mA 0.2 to 0.6 mA UDC= 24 V ± 1.2 mA 0.4 to 1.2 mA Signal current in neutral position U DC = 12 V ± 0 mA ± 0.4 mA UDC = 24 V ± 0 mA ± 0.8 mA Inverter Non inverted Output signal = Us Inverted Output signal = -1 x (Us -0.5 x U+) + 0.5 x U Electrical—PVE (Extended only) characteristics Signal regulation Us Us Minimum (50%) 0.37 to 0.63 at 100% movement U+ Maximum (200%) 0.25 to 0.75 at 50% movement Dead band compensation U s Minimum 0.00 U+ Maximum 0.06 Electrical—Analog Cat 1, Cat 3 characteristics Sensor type Hall effect with redundant sensors Supply voltage (Vs) 4.5 to 5.5 VDC Output 10 to 90% of input voltage Output impedance 1 mA max output current at 200 Ohm output impedance Digital outputs Vs-0.3 VDC, maximum current 100 mA Data Sheet JS1 Heavy Duty Joysticks © Danfoss | March 2019 AI00000239en-000901 | 3

Electrical—CAN, CAN+, and CANalog characteristics Sensor type Hall effect with redundant sensors Potentiometer Resolution 12 bit Supply voltage (Vs) 9 to 36 VDC Output J1939 and CANopen protocols Can+ Sensor Power 5.0 VDC +/- 5% at 250 mA CANalog volt reference 5.0 VDC +/- 5% at 50 mA Base maximum current consumption 120 mA at 9 V CANalog analog outputs 0.5 to 4.5 VDC at 1 mA max Electrical—PWM (programmable) characteristics Sensor type Hall effect with redundant sensors Potentiometer Resolution 12 bit Supply voltage (Vs) 9 to 36 Vdc Current consumption, no load 120 mA Maximum current consumption 15 A Outputs (3 amps) PWM(4) Digital(2) Environmental characteristics Operating temperature CAN, CANalog, CAN+, Analog Cat1, Analog Cat3, PWM -30° C to 80° C (-22° F to 176° F) PVE -30° C to 70° C (-22° F to 158° F) Storage temperature -40° C to 85° C (-40° F to 185° F) EMI/RFI rating 150 V/m Vibration 25 G, 10 ms, 500 bumps in each of 6 directions IEC 60068-2-29 test Eb Shock 50 G, 11 ms, 3 shocks in each of 6 directions IEC 60068-2-29 test Ea Ingress Protection (IP) rating Up to IP 66 (dependent on grip sealing selected) JS1-H part numbers, refer to: JS1 Heavy Duty Joystick Family Technical Information, BC00000347. Danfoss connector bag assemblies part numbers (Must be ordered separately from joystick) Description Danfoss part number One 6 pin DEUTSCH connector 10101551 Two 6 pin DEUTSCH connectors 11177980 Two 12 pin DEUTSCH connectors (GRY/BLK) 10100945 Two 12 pin and One 6 pin DEUTSCH connectors (GRY/BLK) 11176538 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. 4 | © Danfoss | March 2019 AI00000239en-000901