1111163 ARIES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  • INFO@ARIESELEC.COMWWW.ARIESELEC.COM

FEATURES

  • Can be used with Intel 80/83C652 and 80C251 microprocessors and any IC that follows standard DIP-to-PLCC pinout conventions.
  • Allows user to switch package styles and avoid shortage problems.
  • Designed to plug directly into your 44-pin PLCC socket.
  • On-board bypass capacitors to reduce power/ground electrical noise.
  • All DIP Pins brought out to the side of the adapter’s plated-through holes to facilitate troubleshooting or debugging. GENERAL SPECIFICATIONS
  • PCB: natural UL 94V-0 FR-4, 0.062 [1.56] thick with 1-oz. Cu traces
  • MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
  • MALE PIN PLATING: 200µ [5.08µ] Sn/Pb per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290
  • SOCKET MATERIAL: UL 94V-0 glass-filled 4/6 Nylon
  • FEMALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
  • FEMALE PIN PLATING: 10µ [0.254µ] Au per MIL -G-45204 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290
  • 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08
  • COLLET CONTACT PLATING: 10µ [0.254µ] Au per MIL -G-45204 over 50µ [127µ] Ni per SAE AMS-QQ-N-290
  • OPERATING TEMPERATURE: 221°F [105°C]
  • INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead
  • WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead
  • NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead 18026 Rev. AA P/N 1111163 40-Pin DIP-to-Socketable PLCC Adapter Pin List PLCC Pin # DIP Pin # PLCC Pin # DIP Pin # 1 20 23 -- 2 1 24 21 3 2 25 22 4 3 26 23 5 4 27 24 6 5 28 25 7 6 29 26 8 7 30 27 9 8 31 28 10 9 32 29 11 10 33 30 12 -- 34 -- 13 11 35 31 14 12 36 32 15 13 37 33 16 14 38 34 17 15 39 35 18 16 40 36 19 17 41 37 20 18 42 38 21 19 43 39 22 20 44 40

ORDERING INFORMATION

CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT DATA SHEET 18027 FOR PLCC-TO-DIP ADAPTER WITH INTEL PROCESSORS.