1110051020 MOLEX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

MINI-B INLINE RECEPTACLE TO MINI-B PLUG STRT PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER DOC TYPE DOC PART REVISION SD-111005-1000 PSD 001 F MATERIAL NUMBER CUSTOMER SHEET NUMBER SEE CHART GENERAL MARKET 1 OF 1 CURRENT REV DESC: OBSOLETED PART NUMBER EC NO: 632260 DRWN: VLOKESHA 2020/02/13 CHK'D: GGA 2020/02/28 APPR: GGA 2020/02/28 INITIAL REVISION: DRWN: J.REEVES 2007/09/11 APPR: KMONROE 2007/09/12 THIRD ANGLE PROJECTION DRAWING SERIES D-SIZE 111005 DIMENSION UNITS SCALE mm 2 :1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH

4 PLACES ± ±

3 PLACES ± ±

2 PLACES ± 0.13 ± 1 PLACE ± 0.25 ±

0 PLACES ± ±

ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION FORMAT: Eng-lega-master-tb-prod-D REVISION: D DATE: 2018/01/18 DOCUMENT STATUS P1 RELEASE DATE 2020/02/28 02:41:19 SIGNAL NAME CONTACT # MINI-B INLINE (HOST) B B NOTCH LOCATION NO CONNECT POLARIZATION "B" #3 BLACK AWG24 B A LABEL FORMAT CUSTOMER P/N ASSEMBLY MATERIAL NUMBERS A MINI-B INLINE POL (HOST) NOTES: 1. PART MUST CONFORM TO THE ELECTRICAL CONNECTION SYSTEM DESIGN SPECIFICATION (SDS) VER 13, DATED 06-APR-06; TEMP CLASS "-40~85 °C". 2. PART MUST CONFORM TO THE LATEST REVISION OF SAE/USCAR-30 & USB 2.0. 3. ALL PLASTIC PARTS MUST HAVE MATERIAL IDENTIFICATION SYMBOLS CLEARLY MARKED, WHEREVER PACKAGE SIZE PERMITS. 4. GENERAL TOLERANCES: ±0.25 ALL ONE PLACE DIMENSIONS, ±0.15 ALL TWO PLACE DIMENSIONS, AND ±0.5 ° ALL ANGULAR DIMENSIONS. 5. 0.3MM MAXIMUM RADIUS PERMISSIBLE ON EDGES AND FILLETS SHOWN AS SHARP FOR PLASTIC PARTS. 6. PARTS ARE TO BE FREE OF SCRATCHES, DISCOLORATION, SALT RESIDUE OR OTHER IMPERFECTIONS THAT MAY AFFECT FUNCTION OR FIT OF PART. 7. IDENTIFICATION LABEL MUST DISPLAY CUSTOMER PART NUMBER, SUPPLIER PART NUMBER, DATE CODE (YYYYMMDD), REVISION, AND LOGO. 8. LEAD FREE, NO ROHS EXEMPTIONS. 9. FINISHES: TERMINAL: SELECTIVE GOLD (Au) IN THE CONTACT AREA; THICKNESS = 0.75 MICROMETER (30 MICROINCH) MINIMUM OVER NICKEL (Ni) OVERALL; THICKNESS = 1.25 MICROMETER (50 MICROINCH) MINIMUM. POLARIZATION "B" RED 450 ±10 BLACK BLACK OUTER JACKET 111005-0250 MOLEX P/N REV YYYYMMDDX NO CONNECT GREEN A 111005-0450 A #1 GREEN AWG28 VBUS MINI-B PLUG POLARIZATION OPTIONS B NOTCH LOCATION 111005-1935 700 ±10 A AB MINI-B PLUG (TARGET) WIRE COLORS MINI-B PLUG POL (TARGET) 740 ±10 SHELL B GND DIM "A" (mm) 111005-1933 NOTCH LOCATION GND SIGNAL NAME TWISTED PAIR 111005-1934 BRAID TO SHELL TERMINATION MINI-B INLINE RECEPTACLE POLARIZATION OPTIONS 3 D+ WHITE PIN #5 111005-1020 #2 WHITE AWG28 111005-1021 1583 ±10 CONTACT # POLARIZATION "A" MATING HEADER FOR MINI-B PLUGS (POLARIZATION - A SHOWN) CABLE CONSTRUCTION 1120 ±10 BLACK LAST LETTER OF DATE CODE "X": 'D'= DAY SHIFT, 'N'= NIGHT SHIFT BAR CODE = MOLEX MATERIAL NUMBER MOLEX P/N REV YYYYMMDDX RED GREEN CABLE BRAID 500 ±10 VBUS WIRING DIAGRAM MOLEX MAT. NO. 250 ±10 DRAIN WIRE NOTCH LOCATION WIRE COLORS PIN #1 BRAID MOLEX LOGO NO CONNECT CABLE BRAID #4 RED AWG24 A MYLAR CUSTOMER P/N SHELL POLARIZATION "A" A D- WHITE

25 REF

DIM -"A" LABEL NOTE 7 MINI-B PLUG SUB-ASSY (TARGET) SEE CHARTMINI-B INLINE RECEPT SUB-ASSY (HOST) SEE CHART PIN #1 PIN #1 PIN #5 PIN #5 A A B B C C D D E E F F G G H H J J K K L L M M