DBS36E-BBCJ01024 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
A B C D E F H I J K L M N O P Q R S T DBS36E-BBCJ01024 | DBS36/50 INCREMENTAL ENCODERS Illustration may differ
Ordering information
Type Part no. DBS36E-BBCJ01024 1104654 Other models and accessories www.sick.com/DBS36_50 Detailed technical data Performance Pulses per revolution 1,024 Measuring step 90°, electric/pulses per revolution Measuring step deviation ± 18° / pulses per revolution Error limits ± 54° / pulses per revolution Duty cycle ≤ 0.5 ± 5 % Interfaces Communication interface Incremental Communication Interface detail TTL / RS-422 Number of signal channels 6-channel Initialization time < 3 ms Output frequency ≤ 300 kHz Load current ≤ 30 mA Power consumption ≤ 0.5 W (without load) Electrical data Connection type Cable, 8-wire, universal, 0.5 m Supply voltage 7 ... 30 V Reference signal, number 1 Reference signal, position 90°, electric, logically gated with A and B Reverse polarity protection ✔ Short-circuit protection of the outputs ✔ 1) MTTFd: mean time to dangerous failure 600 years (EN ISO 13849-1) 2) 1) The short-circuit rating is only given if Us and GND are connected correctly. 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of com- ponents, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532. Mechanical data Mechanical design Blind hollow shaft 1) Order collets for 5 mm, 6 mm and 1/4” mm separately as accessories. 2) Higher values are possible using limited bearing life. 3) Allow for self-heating of 4.7 K per 1,000 rpm when designing the operating temperature range. 4) No permanent operation. Decreasing signal quality.
2 INCREMENTAL ENCODERS | SICK Product data sheet | 2023-11-20 18:53:39
Subject to change without notice
DBS36E-BBCJ01024 | DBS36/50 INCREMENTAL ENCODERS Shaft diameter 8 mm 1) Weight + 150 g (with connecting cable) Shaft material Stainless steel Flange material Aluminum Housing material Aluminum Material, cable PVC Start up torque + 0.5 Ncm (+20 °C) Operating torque 0.4 Ncm (+20 °C) Permissible movement static ± 0.3 mm (radial) ± 0.5 mm (axial) 2) Permissible movement dynamic ± 0.1 mm (radial) ± 0.2 mm (axial) 2) Operating speed 6,000 min⁻¹ 3) Maximum operating speed ≤ 8,000 min⁻¹ 4) Moment of inertia of the rotor 0.8 gcm² Bearing lifetime 2 x 10^9 revolutions Angular acceleration ≤ 500,000 rad/s² 1) Order collets for 5 mm, 6 mm and 1/4” mm separately as accessories. 2) Higher values are possible using limited bearing life. 3) Allow for self-heating of 4.7 K per 1,000 rpm when designing the operating temperature range. 4) No permanent operation. Decreasing signal quality. Ambient data EMC According to EN 61000-6-2 and EN 61000-6-3 (class A) Enclosure rating IP65 Permissible relative humidity 90 % (Condensation not permitted) Storage temperature range –40 °C ... +100 °C, without package Resistance to shocks 100 g, 6 ms (EN 60068-2-27) Resistance to vibration 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) Classifications eCl@ss 5.0 27270501 eCl@ss 5.1.4 27270501 eCl@ss 6.0 27270590 eCl@ss 6.2 27270590 eCl@ss 7.0 27270501 eCl@ss 8.0 27270501 eCl@ss 8.1 27270501 eCl@ss 9.0 27270501 eCl@ss 10.0 27270501 eCl@ss 11.0 27270501 eCl@ss 12.0 27270501 ETIM 5.0 EC001486 2023-11-20 18:53:39 | Product data sheet Subject to change without notice INCREMENTAL ENCODERS | SICK 3
A B C D E F H I J K L M N O P Q R S T DBS36E-BBCJ01024 | DBS36/50 INCREMENTAL ENCODERS ETIM 6.0 EC001486 ETIM 7.0 EC001486 ETIM 8.0 EC001486 UNSPSC 16.0901 41112113 Dimensional drawing (Dimensions in mm (inch)) Blind hollow shaft, cable 45.4 (1.79) 0.5 (0.02) (7.7) (0.30) (0.04) 2x M3 set screw Hexagon socket screw size 1,5 4x M2.5 screw @ 30 mm (1.18) PCD 3.2 (0.13) 20° Ø 42 (1.65 Ø 46 (1.81) 21.5 (0.85) Ø 8 F7 (0.31) Ø 37 (1.46) Attachment specifications min. 6 max. 21 Ø X –0.015 Encoder 6 mm DBS36E-BA 2056390
4 INCREMENTAL ENCODERS | SICK Product data sheet | 2023-11-20 18:53:39
Subject to change without notice
DBS36E-BBCJ01024 | DBS36/50 INCREMENTAL ENCODERS Encoder Premounted 5 mm 2066991 6 mm 2056390 1/4″ On request 8 mm DBS36E-BB Not required PIN assignment A A - B B - WH BN PK BK Z Z - GND + US VT YE BU RD Wire colors (ca- ble connection) Male connec- tor M12, 8-pin Male connec- tor M23, 12-pin TTL/HTL 6- channel signal Explanation Brown 1 6 A- Signal wire White 2 5 A Signal wire Black 3 1 B- Signal wire Pink 4 8 B Signal wire Yellow 5 4 Z- Signal wire Purple 6 3 Z Signal wire Blue 7 10 GND Ground connection Red 8 12 +Us Supply voltage - - 9 Not assigned Not assigned - - 2 Not assigned Not assigned - - 11 Not assigned Not assigned - - 7 Not assigned Not assigned Screen Screen Screen Screen Screen connected to en- coder housing 2023-11-20 18:53:39 | Product data sheet Subject to change without notice INCREMENTAL ENCODERS | SICK 5
A B C D E F H I J K L M N O P Q R S T DBS36E-BBCJ01024 | DBS36/50 INCREMENTAL ENCODERS Diagrams Signal outputs for electrical interfaces TTL and HTL Measuring step Cw with view on the encoder shaft in direction "A", compare dimensional drawing. ① Interfaces G, P, R only for channels A, B, Z. Supply voltage Output 7 V...30 V TTL/RS422 7 V...30 V HTL/Push Pull 7 V...27 V HTL/push pull, 3 channel 4.5 V...30 V Open Collector NPN, 3 channel Recommended accessories Other models and accessories www.sick.com/DBS36_50 Brief description Type Part no. Other mounting accessories Two-sided stator coupling, screw hole diameter 42 to 46 mm, slot width 3.2 mm BEF-DS-DBS36 2066301 Plug connectors and cables Head A: cable Head B: Flying leads Cable: SSI, Incremental, HIPERFACE®, PUR, halogen-free, shielded LTG-2308-MWENC 6027529 Head A: cable Head B: Flying leads Cable: SSI, Incremental, PUR, shielded LTG-2411-MW 6027530 Head A: cable Head B: Flying leads Cable: SSI, Incremental, PUR, halogen-free, shielded LTG-2512-MW 6027531
6 INCREMENTAL ENCODERS | SICK Product data sheet | 2023-11-20 18:53:39
Subject to change without notice
DBS36E-BBCJ01024 | DBS36/50 INCREMENTAL ENCODERS Brief description Type Part no. Head A: cable Head B: Flying leads Cable: SSI, TTL, HTL, Incremental, PUR, halogen-free, shielded LTG-2612-MW 6028516 Head A: male connector, M12, 8-pin, straight, A-coded Cable: Incremental, shielded STE-1208-GA01 6044892 STE-2312-G01 2077273 Head A: male connector, M23, 12-pin, straight Cable: HIPERFACE®, SSI, Incremental, shielded STE-2312-GX 6028548 2023-11-20 18:53:39 | Product data sheet Subject to change without notice INCREMENTAL ENCODERS | SICK 7
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com