DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com V and W Series Multipurpose Power Line RFI Filter for Emission Control Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: .5 mA @250 VAC 50 Hz: .82 mA Hipot rating (one minute): Line to Ground: 2250 VDC Line to Line: 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 3 to 20A* Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io= Ir(85-Ta)/45

  • Offers an N = 3 (“T”) Line to Ground impedance to common mode and an N = 5 “Dbl. Pi”) impedance for Line to Line differential mode interference
  • Designed for susceptibility use when equipment impedance at RF frequencies is low O rdering Inform ation

20 V V 6

1 – .250 [6.3] spade terminals 6 – Threaded bolt 7 – IEC inlet* (line side) .250 [6.3] spade terminals (load side) V or W Series Leakage current designation V – Standard Current Rating 3, 6, 10 or 20A Specifications UL Recognized CSA Certified VDE Approved/one.sup VV6 / VW6 *IEC 60320-1 C20 inlet mates with C19 connector VV1 / VW1 E lectrical Schem atics LINE LOAD V Series LINE LOAD W Series (3, 6 & 10A) LINE LOAD W Series (20A) W Series

  • Offers an N = 4 (“Dbl. L”) Line to Ground impedance for common mode and an N=5 (“Dbl. Pi”) impedance for Line to Line differential mode interference
  • Designed for use when equipment impedance at RF frequencies is high
  • Two stage construction provides excellent suppression at high frequencies V Series /one.sup20VW7, 20A model tested by Underwriters Laboratories to US and Canadian requirements and is VDE approved at 16A, 250VAC Both the V and W series are effective to control emissions in equipment using SCR and T 2L circuits for compliance with FCC Part 15, Subpart J and EN55022, Level A, down to 150kHz

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com V and W Series Multipurpose Power Line RFI Filter for Emission Control(continued) A vailable Part Num bers 3VV1 3VW1 6VV1 3VW1 10VV1 10VW1 20VV1 20VW1 20VV6 20VW6 20VW7* C ase Styles V1 / W1 (3, 6 & 10A) D E A C B V1 / W1 (20A) DE A C B 2.00 50.8 V6 / W6 E D B 2.00 50.8 A C C ase Styles (continued) VW7 A B C .047 ± .010 1.19 ± .25 5.33 ± .025 135.38 ± .635 2.25 57.15 Threaded inserts C ase Dim ensions Recom m ended Panel Cutout 1.22 30.99 1.60 40.46 .75 19.05 2.30 58.42 CL 2.12 53.85 .157 3.98 Dia. .219

5.56 R Mounting Plane

Part No. ABCDE *20VW7, 20A model tested by Underwriters Laboratories to US and Canadian requirements and is VDE approved at 16A, 250VAC

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com V and W Series Multipurpose Power Line RFI Filter for Emission Control(continued) Perform ance Data Typical Insertion Loss Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) 3VV 6VV Measured in closed 50 Ohm system Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system 10VV 20VV Differential Mode / Symmetrical (Line to Line) 3VW 6VW 10VW 20VW 0.1 1 10 30 Frequency in MHz db 100 0 0.1 1 10 30 Frequency in MHz db 100 0.1 1 10 30 Frequency in MHz db 100 0 0.1 1 10 30 Frequency in MHz db 100 0.1 1 10 30 Frequency in MHz db 100 0 0.1 1 10 30 Frequency in MHz db 100 0.1 1 10 30 Frequency in MHz db 100 0 0.1 1 10 30 Frequency in MHz db 100