10VP-760-R/A2S

10VP MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: 10VP http://www.m-system.co.jp/ 10VP SPECIFICATIONS ES-0821 Rev.16 Page 1/3 High-density Signal Conditioners 10-RACK I/P TRANSDUCER Functions & Features

• Converting a DC input into a proportional standard pneumatic signal
• Semiconductor pressure sensor in the feedback circuit
• High resolution
• No mounting position effect Typical Applications
• Converting a 4 – 20 mA from a PID controller into a pneumatic signal MODEL: 10VP-[1][2]0-R[3]

ORDERING INFORMATION

• Code number: 10VP-[1][2]0-R[3] Specify a code from below for each [1] through [3]. (e.g. 10VP-260-R/A2S/Q)
• Specify the specification for option code /Q (e.g. /C01) [1] PNEUMATIC CONNECTION 2: Rc 1/4" 5: Rc 1/8" fitting 7: 1/4" NPT fitting [2] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) Voltage 6: 1 – 5 V DC (Input resistance 1 MΩ min.) OUTPUT 2 0: None POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS (multiple selections) Output 1 blank: 0.2 - 1.0kgfcm2 /A1S: 19.6 – 98.1 kPa /A2S: 20 – 100 kPa /A3S: 20.7 – 103.4 kPa /A2: 0.2 – 1.0 bar /A3: 3 – 15 psig Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

• Standard rack with air manifold The 10VP must be installed in a 10-Rack series rack with air manifold (the model 10BXAN is not available). GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear Connection Input: M3.5 screw terminals (torque 0.8 N·m) and card- edge connector Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female (torque ≤ 12 N·m) Power input: Supplied from card-edge connector Material Housing: Flame-resistant resin (black) Base: Die cast aluminium Screw terminals: Nickel-plated steel Isolation: Input to power Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated OUTPUT SPECIFICATIONS ■ Output: 19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm2 20 – 100 kPa, 0.2 – 1.0 bar

MODEL: 10VP http://www.m-system.co.jp/ 10VP SPECIFICATIONS ES-0821 Rev.16 Page 2/3 20.7 – 103.4 kPa, 3 – 15 psig The output goes below 0 % if the input loop is open. Maximum air delivery: 60 Nl/minute (2.1 SCFM) Maximum air exhaust: 60 Nl/minute (2.1 SCFM) INSTALLATION Supply pressure: 140 kPa (1.4 kgf/cm2, 1.4 bar, 20 psig) ±10 %. Use dry air containing no carbon black or other foreign particles. To ensure reliability use an air filter (0.01 microns). Air consumption: 6 Nl/minute (0.21 SCFM) Current consumption: Approx. 30 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 300 g (0.66 lb) PERFORMANCE in percentage of span Accuracy: ±0.3 % including linearity and repeatability Linearity: ±0.2 % Repeatability: 0.1 % Temp. coefficient: ±0.05 %/°C (±0.03 %/°F) Response time: ≤ 3 sec. (0 – 90 %) Mounting position effect: ±0.1 % (all dimensions) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to power) EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 91 (3.58) 99 (3.90 ) 3 (.12) 32 (1.26) 2–4.3 (.17) dia. MTG HOLE 20 (.79) approx. 27 (1.06) * [13 (.51)] OUTPUT CONNECTION Rc 1/4”, Rc 1/8”, 1/4” NPT FITTING 7 8 5 6 4–M3.5 SCREW Fitting provided for Rc 1/8" or 1/4" NPT connection. 82 (3.23) 25 (.98)

MODEL: 10VP http://www.m-system.co.jp/ 10VP SPECIFICATIONS ES-0821 Rev.16 Page 3/3 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Pilot Valve Z S SUPPLY PRESSURE Semiconductor Pressure Sensor Deviation Amplifier+ INPUT Driver OUTPUT CONNECTOR INPUT ELECTRO-MAGNETIC FLAPPER POWER *Input shunt resistor incorporated for current input. Specifications are subject to change without notice.