10TQ IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
1www.irf.com 10TQ... 10TQ...S Major Ratings and Characteristics IF(AV) Rectangular 10 A waveform VRRM 35 to 45 V IFSM @ tp = 5 µs sine 1050 A VF @ 10 Apk, TJ = 125°C 0.49 V TJ range - 55 to 175 °C Characteristics 10TQ Units Description/ Features The 10TQ.. Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and re- verse battery protection. 175° C T J operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability IF(AV) = 10Amp VR = 35 to 45V Case Styles 10TQ... TO-220 10TQ... S D2PAK
10TQ... Series Bulletin PD-20057 01/01 www.irf.com VFM Max. Forward Voltage Drop (1) 0.57 V @ 10A * See Fig. 1 0.67 V @ 20A
0.49 V @ 10A
0.61 V @ 20A
I RM Max. Reverse Leakage Current (1) 2 mA T J = 25 °C * See Fig. 2 15 mA T J = 125 °C CT Max. Junction Capacitance 900 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10,000 V/ µs (Rated VR) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications Parameters 10TQ Conditions (1) Pulse Width < 300µs, Duty Cycle < 2% TJ Max. Junction Temperature Range -55 to 175 °C Tstg Max. Storage Temperature Range -55 to 175 °C RthJC Max. Thermal Resistance Junction 2.0 °C/W DC operation * See Fig. 4 to Case RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface , smooth and greased Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) Thermal-Mechanical Specifications Parameters 10TQ Conditions IF(AV) Max. Average Forward Current 10 A 50% duty cycle @ T C = 151° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 1050 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 280 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 13 mJ T J = 25 °C, IAS = 2 Amps, L = 6.5 mH IAR Repetitive Avalanche Current 2 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Parameters 10TQ Conditions Absolute Maximum Ratings A Part number 10TQ035 10TQ040 10TQ045 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 35 40 45 Voltage Ratings Following any rated load condition and with rated VRRM applied Units Units Units
10TQ... Series Bulletin PD-20057 01/01 www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 100 1000 0 1 02 03 04 05 0 T = 25°CJ .001 .01 D = 0.33 D = 0.50 D = 0.25 D = 0.17 D = 0.08 S ingle Pulse (Thermal Resistance) PDM Notes: 1. D uty factor D = t / t 2. Peak T = P x Z + T JD M thJC C Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 1000 T = 175°C T = 125°C T = 25°C J J J .0001 .001 .01 100 1000 0 5 10 15 20 25 30 35 40 4 5 T = 175°C 150°C 125°C 100°C 75°C 50°C 25°C J Instantaneous Forward Current - I F (A) Forward Voltage Drop - V FM (V) Reverse Voltage - V R (V) Reverse Current - I R (mA) Reverse Voltage - V R (V) Junction Capacitance - C T (pF) t 1 , Rectangular Pulse Duration (Seconds) Thermal Impedance - Z thJC (°C/W)
10TQ... Series Bulletin PD-20057 01/01 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current 155 160 165 170 175 180 05 1 0 1 DC 10TQ R (DC) = 2.0°C/WthJC 05 1 0 1 5 DC D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS Li mit 100 1000 10 100 1000 10000 At Any Rated Load Condition And With Rated V Applied Following Surge RRM FREE-WHEEL DIO DE 40HFL40S02CURRENT MONITOR HIGH-SPEED SW ITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+ Allowable Case Temperature (°C) Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Average Power Loss (Watts) Square Wave Pulse Duration - t p (microsec) Non-Repetitive Surge Current - I FSM (A)
10TQ... Series Bulletin PD-20057 01/01 www.irf.com Outline Table Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MA X. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT Anode 1 3 Base Cathode Cathode Anode 1 3 Base Cathode N /C
10TQ... Series Bulletin PD-20057 01/01 www.irf.com Ordering Information Table Device Code 1 524 3 1 - Essential Part Number 2 - T = TO-220 3 - Q = Schottky Q Series 4 - Voltage Rating 5 -S = D 2Pak
10 T Q 045 S
035 = 35V 040 = 40V 045 = 45V IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/01