10TQ045

10TQ035 IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Bulletin PD-20057 rev. B 06/06 1www.irf.com 10TQ... 10TQ...S Major Ratings and Characteristics IF(AV) Rectangular 10 A waveform VRRM 35 - 45 V IFSM @ tp = 5 μs sine 1050 A VF @ 10 Apk, TJ = 125°C 0.49 V TJ range - 55 to 175 °C Characteristics Values Units Description/ Features The 10TQ.. Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and re- verse battery protection. 175° C T J operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability IF(AV) = 10Amp VR = 35 - 45V Case Styles 10TQ... TO-220 10TQ... S D2PAK Anode 1 3 Base Cathode Cathode Anode 1 3 Base Cathode N/C

10TQ... Series Bulletin PD-20057 rev. B 06/06 www.irf.com VFM Max. Forward Voltage Drop (1) 0.57 V @ 10A * See Fig. 1 0.67 V @ 20A

0.49 V @ 10A

0.61 V @ 20A

IRM Max. Reverse Leakage Current (1) 2 mA T J = 25 °C * See Fig. 2 15 mA T J = 125 °C CT Max. Junction Capacitance 900 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated V R) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications (1) Pulse Width < 300μs, Duty Cycle < 2% TJ Max. Junction Temperature Range -55 to 175 °C Tstg Max. Storage Temperature Range -55 to 175 °C RthJC Max. Thermal Resistance Junction 2.0 °C/W DC operation * See Fig. 4 to Case RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface , smooth and greased Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Marking Device 10TQ045 Case Style TO-220 10TQ045S Case Style D 2Pak Kg-cm (Ibf-in) Thermal-Mechanical Specifications Parameters 10TQ Conditions IF(AV) Max. Average Forward Current 10 A 50% duty cycle @ T C = 151° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 1050 5 μs Sine or 3μs Rect. pulse Surge Current * See Fig. 7 280 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 13 mJ T J = 25 °C, IAS = 2 Amps, L = 6.5 mH IAR Repetitive Avalanche Current 2 A Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Absolute Maximum Ratings A Part number 10TQ035 10TQ045 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 35 45 Voltage Ratings Following any rated load condition and with rated VRRM applied Units Parameters 10TQ Units Conditions Parameters 10TQ Units Conditions

10TQ... Series Bulletin PD-20057 rev. B 06/06 www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 100 1000 0 1 02 03 04 05 0 T = 25°CJ .001 .01 D = 0.33 D = 0.50 D = 0.25 D = 0.17 D = 0.08 Single Pulse (Thermal Resistance) PDM Notes: 1. D uty factor D = t / t 2. Peak T = P x Z + T JD M thJC C Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 1000 T = 175°C T = 125°C T = 25°C J J J .0001 .001 .01 100 1000 0 5 10 15 20 25 30 35 40 45 T = 175°C 150°C 125°C 100°C 75°C 50°C 25°C J Instantaneous Forward Current - I F (A) Forward Voltage Drop - V FM (V) Reverse Voltage - V R (V) Reverse Current - I R (mA) Reverse Voltage - V R (V) Junction Capacitance - C T (pF) t 1 , Rectangular Pulse Duration (Seconds) Thermal Impedance - Z thJC (°C/W)

10TQ... Series Bulletin PD-20057 rev. B 06/06 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current 155 160 165 170 175 180 05 1 0 1 DC 10TQ R (DC) = 2.0°C/WthJC 05 1 0 1 5 DC D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS Li mit 100 1000 10 100 1000 10000 At Any Rated Load Condition And With Rated V Applied Following Surge RRM FREE- WHEEL DIODE 40HF L40S02CU R R E NT MONIT OR HIGH-S PEED S WIT CHIRFP460 L DUT Rg = 25 o h m Vd = 25 Volt+ Allowable Case Temperature (°C) Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Average Power Loss (Watts) Square Wave Pulse Duration - t p (microsec) Non-Repetitive Surge Current - I FSM (A)

10TQ... Series Bulletin PD-20057 rev. B 06/06 www.irf.com Outline Table Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches)

10TQ... Series Bulletin PD-20057 rev. B 06/06 www.irf.com Part Marking Information 10TQ045STHIS IS A 10TQ045S ASSEMBLED ON WW 02, 2000 LOT CODE 8024 LOGO LOT CODE ASSEMBLY RECTIFIER INTERNATIONAL WEEK 02 YEAR 0 = 2000 DATE CODE PART NUMBER LINE C D2Pak LOT CODE ASSEMBLY RECTIFIER INTERNATIONALEXAMPLE: ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" THIS IS A 10TQ045 LOT CODE 1789 LOGO WEEK 19 LINE C PART NUMBER DATE CODE YEAR 1 = 2001 Dimensions in millimeters and (inches) Tape & Reel Information TO-220AC

10TQ... Series Bulletin PD-20057 rev. B 06/06 www.irf.com 035 = 35V 045 = 45V Ordering Information Table

10 T Q 045 S -

1 - Current Rating (10 = 10A) T = TO-220 3 - Schottky "Q" Series 4 - Voltage Ratings 5 - y none = TO-220 y S= D 2Pak 6 - y none = Standard Production y PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.