10TP-110-R

10TG MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: 10TG http://www.m-system.co.jp/ 10TG SPECIFICATIONS ES-0839 Rev.6 Page 1/3 High-density Signal Conditioners 10-RACK TACHOGENERATOR TRANSMITTER Functions & Features

• Converting an AC voltage from a tachogenerator (tachometer) into two standard process signals
• Optional second channel output available at the front terminals and at the Standard Rack connector Typical Applications
• Measuring rotating or moving speed of multispeed motors, belt conveyers, metering pumps MODEL: 10TG–[1][2][3]–R[4]

ORDERING INFORMATION

• Code number: 10TG-[1][2][3]-R[4] Specify a code from below for each [1] through [4]. (e.g. 10TG-1A6-R/Q)
• Special input range (For code U)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT Voltage 1: 0 – 35 V AC (Input resistance 200 kΩ min.) U: Specify voltage (See INPUT SPECIFICATIONS) (0 % input must be 0 V.) [2] OUTPUT 1 Current A: 4 – 20 mA DC (Load resistance 600 Ω max.) B: 2 – 10 mA DC (Load resistance 1200 Ω max.) C: 1 – 5 mA DC (Load resistance 2400 Ω max.) D: 0 – 20 mA DC (Load resistance 600 Ω max.) E: 0 – 16 mA DC (Load resistance 750 Ω max.) F: 0 – 10 mA DC (Load resistance 1200 Ω max.) G: 0 – 1 mA DC (Load resistance 12 kΩ max.) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) [3] OUTPUT 2 0: None Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: Card-edge connector and M3.5 screw terminals (torque 0.8 N·m) Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output 1 to output 2 to power Overrange output: Approx. 0 to 120 % at 1 – 5V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS Minimum span: 50 mV Input span: Input Resistance 50 mV – 3 V : 10 k (Ω minimum)

MODEL: 10TG http://www.m-system.co.jp/ 10TG SPECIFICATIONS ES-0839 Rev.6 Page 2/3 ≥ 3V : 200 k Frequency: 100 Hz min., 1 kHz max. with 100 % input INSTALLATION Current consumption: Approx. 35 mA with voltage output 1 Approx. 55 mA with current output 1 Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 200 g (0.44 lb) PERFORMANCE in percentage of span Accuracy: ±0.4 % (excluding ≤ 15 Hz) Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Ripple: 0.5 %p-p max. (100/120 Hz) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 7–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 25 (.98) 1 2 5 6 7 8

MODEL: 10TG http://www.m-system.co.jp/ 10TG SPECIFICATIONS ES-0839 Rev.6 Page 3/3 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation INPUT 1 AC Amplifier Output Driver OUTPUT 1 RMS Operation SZ Output Driver OUTPUT 2 SZ CONNECTOR *1 output type has the output 1 connected to the card-edge connector in parallel. Remark 1) The section enclosed by broken line is only for 2nd output channel. OUTPUT 2* POWER Specifications are subject to change without notice.