10SMBJ UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
Description
Applications
Revision March 1,2022 Surface Mount Transient Voltage Suppressors www.unsemi.com.tw
5.0 To 200V 1000W
www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/5 Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 guranteed Polarity: Color band denotes TVS cathode en Mounting position: Any 1000 5.0 See Next Table -55 to +150 -40 to +125 5.0 PPPM PD IPP TJ ,TSTG TOP VF Peak power dissipation with a 10/1000μs waveform Power Dissipation on Infinite Heat Sink at TL=75°C Peak pulse current with a 10/1000μs waveform Junction and storage temperature range Operating temperature range Maximum Instantaneous Forward Voltage at 50A for Unidirectional W W A V Parameter Symbol Value Unit Maximum Ratings and Thermal Characteristics (TA =25℃ unless otherwise noted) Uni-directional Bi-directional
Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/5 10SMBJ Series VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Marking Uni Bi 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 201.00 211.00 224.00 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 180.0 190.0 200.0 10SMBJ5.0CA 10SMBJ6.0CA 10SMBJ6.5CA 10SMBJ7.0CA 10SMBJ7.5CA 10SMBJ8.0CA 10SMBJ8 5CA 10SMBJ9.0CA 10SMBJ10CA 10SMBJ11CA 10SMBJ12CA 10SMBJ13CA 10SMBJ14CA 10SMBJ15CA 10SMBJ16CA 10SMBJ17CA 10SMBJ18CA 10SMBJ20CA 10SMBJ22CA 10SMBJ24CA 10SMBJ26CA 10SMBJ28CA 10SMBJ30CA 10SMBJ33CA 10SMBJ36CA 10SMBJ40CA 10SMBJ43CA 10SMBJ45CA 10SMBJ48CA 10SMBJ51CA 10SMBJ54CA 10SMBJ58CA 10SMBJ60CA 10SMBJ64CA 10SMBJ70CA 10SMBJ75CA 10SMBJ78CA 10SMBJ85CA 10SMBJ90CA 10SMBJ100CA 10SMBJ110CA 10SMBJ120CA 10SMBJ130CA 10SMBJ150CA 10SMBJ160CA 10SMBJ170CA 10SMBJ180CA 10SMBJ190CA 10SMBJ200CA A6V A7V AV8 A10 A11 A12 A13 A14 A15 A16 A17 A18 A20 A22 A24 A26 A28 A30 A33 A36 A40 A43 A45 A48 A51 A54 A58 A60 A64 A70 A75 A78 A85 A90 A100 A110 A120 A130 A150 A160 A170 A180 A190 A200 C6V C7V CV8 C10 C11 C12 C13 C14 C15 C16 C17 C18 C20 C22 C24 C26 C28 C30 C33 C36 C40 C43 C45 C48 C51 C54 C58 C60 C64 C70 C75 C78 C85 C90 C100 C110 C120 C130 C150 C160 C170 C180 C190 C200 200 200 100 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 220.00 234.00 247.00 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 292.0 307.0 324.0 108.7 97.1 89.3 83.4 77.6 73.6 69.5 65.0 58.9 55.0 50.3 46.6 43.1 41.0 38.5 36.3 34.3 30.9 28.2 25.7 23.8 22.1 20.7 18.8 17.3 15.5 14.4 13.8 13.0 12.2 11.5 10.7 10.4 9.7 8.9 8.3 8.0 7.3 6.9 6.2 5.7 5.2 4.8 4.2 3.9 3.7 3.5 3.3 3.1 Electrical Characteristics (@=25℃ unless otherwise Specified) 10SMBJ5.0A 10SMBJ6.0A 10SMBJ6.5A 10SMBJ7.0A 10SMBJ7.5A 10SMBJ8.0A 10SMBJ8.5A 10SMBJ9.0A 10SMBJ10A 10SMBJ11A 10SMBJ12A 10SMBJ13A 10SMBJ14A 10SMBJ15A 10SMBJ16A 10SMBJ17A 10SMBJ18A 10SMBJ20A 10SMBJ22A 10SMBJ24A 10SMBJ26A 10SMBJ28A 10SMBJ30A 10SMBJ33A 10SMBJ36A 10SMBJ40A 10SMBJ43A 10SMBJ45A 10SMBJ48A 10SMBJ51A 10SMBJ54A 10SMBJ58A 10SMBJ60A 10SMBJ64A 10SMBJ70A 10SMBJ75A 10SMBJ78A 10SMBJ85A 10SMBJ90A 10SMBJ100A 10SMBJ110A 10SMBJ120A 10SMBJ130A 10SMBJ150A 10SMBJ160A 10SMBJ170A 10SMBJ180A 10SMBJ190A 10SMBJ200A
Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 10SMBJ Series
10 SMBJ C Axxx
5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VRWM VOLTAGE SERIES Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 2 - Pulse Derating CurveFigure 1- Pulse Waveform TA-Ambient temperature(°C) 0 25 50 75 100 125 150 175 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % t - Time (ms) 10/1000µsec. Waveform as defined by R.E.A Half Value IPPM (IPPM/2) Peak Value I PPM tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 0 1.0 2.0 3.0 4.0 100 150 IPPM - Peak Pulse Current, % I RSM V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional
Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 10SMBJ Series DO-214AA (SMB) Cathode Band Dimensions Min Max MaxMin Inches Millimeters A B C D E F G H I J K L 0.077 0.171 0.130 0.084 0.030 0.201 0.006 0.089 0.085 0.085 0.087 0.191 0.155 0.096 0.060 0.008 0.216 0.012 0.107 1.960 4.350 3.300 2.130 0.750 5.100 0.152 2.260 2.160 2.160 2.200 4.850 3.940 2.440 1.520 0.203 5.500 0.305 2.740 Soldering Parameters TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/Second max 3°C/Second max 217°C 60 -150 Seconds 260 +0/-5°C 20-40 Seconds 6°C/Second Max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate
Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 10SMBJ Series
Ordering Information
Package Quantity Packaging Option 10SMBJXXXXX DO-214AA 3,000 Packaging Specification Tape & Reel -12mm/13″tape EIA STD RS-481 Tape and Reel Specifications 0.061 (1.55) 0.512(13.0) Arbor Hole Diamete Dimensions are in inches (and millimeters) Direction of Feed 0.472 (12.0) Diameter Cover tape 0.315 (8.0) 0.157 (4.0) 0.35 (9.00Ď 13.0 (330.0) 0.63 (15.88)
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.