10PV-5A6-R

10PV MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: 10PV http://www.m-system.co.jp/ 10PV SPECIFICATIONS ES-0820 Rev.11 Page 1/3 High-density Signal Conditioners 10-RACK P/I TRANSDUCER Functions & Features

• Converting a standard pneumatic signal into a proportional DC output
• Optional second channel output available at the front terminals and at the Standard Rack connector Typical Applications
• Converting a pneumatic system into a 4 – 20 mA for indicating and controlling in DCS system MODEL: 10PV-[1][2][3]-R[4]

ORDERING INFORMATION

• Code number: 10PV-[1][2][3]-R[4] Specify a code from below for each [1] through [4]. (e.g. 10PV-2A6-R/A2S/Q)
• Specify the specification for option code /Q (e.g. /C01) [1] PNEUMATIC CONNECTION 2: Rc 1/4" 5: Rc 1/8" fitting 7: 1/4" NPT fitting [2] OUTPUT 1 Current A: 4 – 20 mA DC (Load resistance 600 Ω max.) B: 2 – 10 mA DC (Load resistance 1200 Ω max.) C: 1 – 5 mA DC (Load resistance 2400 Ω max.) D: 0 – 20 mA DC (Load resistance 600 Ω max.) E: 0 – 16 mA DC (Load resistance 750 Ω max.) F: 0 – 10 mA DC (Load resistance 1200 Ω max.) G: 0 – 1 mA DC (Load resistance 12 kΩ max.) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) [3] OUTPUT 2 0: None Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) Pressure Range blank: 0.2 - 1.0kgf/cm2 /A1S: 19.6 – 98.1 kPa /A2S: 20 – 100 kPa /A3S: 20.7 – 103.4 kPa /A2: 0.2 – 1.0 bar /A3: 3 – 15 psig Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear Connection Output: M3.5 screw terminals (torque 0.8 N·m) and card- edge connector Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female (torque ≤12 N·m) Power input: Supplied from card-edge connector Material Housing: Flame-resistant resin (black) Base: Die cast aluminium Screw terminals: Nickel-plated steel Isolation: Output 1 to output 2 to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front)

MODEL: 10PV http://www.m-system.co.jp/ 10PV SPECIFICATIONS ES-0820 Rev.11 Page 2/3 INPUT SPECIFICATIONS ■ Input 19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm2 20 – 100 kPa, 0.2 – 1.0 bar 20.7 – 103.4 kPa, 3 – 15 psig INSTALLATION Current consumption: Approx. 35 mA with voltage output 1 Approx. 55 mA with current output 1 Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 200 g (0.44 lb) PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28 psig) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (output 1 to output 2 to power)

1500 V AC @ 1 minute (output or power to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 91 (3.58) 99 (3.90 ) 3 (.12) 32 (1.26) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE 20 (.79) approx. 27 (1.06)* [13 (.51)] PNEUMATIC CONNECTION Rc 1/4”, Rc 1/8”, 1/4” NPT FITTING 7 8 5 6 4–M3.5 SCREW Fitting provided for Rc 1/8" or 1/4" NPT connection.

MODEL: 10PV http://www.m-system.co.jp/ 10PV SPECIFICATIONS ES-0820 Rev.11 Page 3/3 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Output Driver OUTPUT 1 Amplifier *1 output type has the output 1 connected to the card-edge connector in parallel. Remark 1) The section enclosed by broken line is only for 2nd output channel. Isolation Output Driver OUTPUT 2 Voltage/ Duty Cycle CONNECTOR OUTPUT 2* POWER Semiconductor Pressure Sensor SZ SZ INPUT Specifications are subject to change without notice.