10PP MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: 10PP 10PP SPECIFICATIONS ES-0861 Rev.9 Page 1/4 http://www.m-system.co.jp/ High-density Signal Conditioners 10-RACK PULSE ISOLATOR Functions & Features

  • Galvanically isolating pulse rate signals
  • Input frequency = output frequency
  • Various outputs (relay, open collector and voltage pulses)
  • Optional second channel output available at the front terminals and at the Standard Rack connector Typical Applications
  • Isolating field pulse signals in order to reduce noises
  • Changing e.g. dry contact signal to e.g. 5 V signals MODEL: 10PP–[1][2][3]–R[4]

ORDERING INFORMATION

  • Code number: 10PP-[1][2][3]-R[4] Specify a code from below for each of [1] through [4]. (e.g. 10PP-332-R/Q)
  • Frequency range (e.g. 0 – 1000 Hz)
  • Specify the specification for option code /Q (e.g. /C01) Note: Output 1 and 2 frequency is equal. [1] INPUT 1: Mechanical contact (max. 30 Hz) 2: Open collector (max. 10 kHz) 3: Voltage pulse (max. 10 kHz) [2] OUTPUT 1 1: Low frequency open collector (max. 30 Hz) 2: High frequency open collector (max. 10 kHz) 3: 5 V pulse (max. 10 kHz) 4: 12 V pulse (max. 10 kHz) 5: 24 V pulse (max. 10 kHz) 8: Photo MOSFET relay pulse (max. 30 Hz) [3] OUTPUT 2 0: None 2: Open collector (max. 10 kHz) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection: M3.5 screw terminals (torque 0.8 N·m) and card-edge connector Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output 1 to output 2 to power Frequency range: Input and output are the same. Chattering protection: Filter provided for mechanical contact input INPUT SPECIFICATIONS Excitation: 12V DC ±2 V @ 30 mA; shortcircuit protection ■ Open Collector Maximum frequency: 10 kHz Pulse width time requirement: 10 μsec. min. for ON and OFF Sensing: Approx. 12 V DC @ 3 mA ON/OFF level: ≤ 200 Ω / 3.5 V for ON, ≥ 100 kΩ / 7 V for OFF ■ Mechanical Contact Maximum frequency: 30 Hz Pulse width time requirement: 10 msec. min. for ON and OFF Sensing: Approx. 12 V DC @ 3 mA ON/OFF level: ≤ 200 Ω / 3.5 V for ON, ≥ 100 kΩ / 7 V for OFF ■ Voltage Pulse Maximum frequency: 10 kHz Pulse width time requirement: 10 μsec. min. for high and low levels

MODEL: 10PP 10PP SPECIFICATIONS ES-0861 Rev.9 Page 2/4 http://www.m-system.co.jp/ Waveforms: Square or sine Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level Input impedance: 10 kΩ min. OUTPUT SPECIFICATIONS ■ Low Frequency Open Collector (Output 1)

50 V DC @ 100 mA (resistive load)

Maximum frequency: 30 Hz Timer: Limits ON time within 75 ±25 msec. for wider than 75 msec. pulses Saturation voltage: 0.5 V DC ■ High Frequency Open Collector (Output 1) Maximum frequency: 10 kHz Saturation voltage: 0.5 V DC ■ Open Collector (Output 2)

40 V DC @ 100 mA (resistive load)

Maximum frequency: 10 kHz Timer: Limits ON time within 75 ±25 msec. for wider than 75 msec. pulses (Timer is provided when output 1 is low frequency open collector or photo MOSFET relay pulse.) Saturation voltage: 0.5 V DC ■ Voltage Pulse Maximum frequency: 10 kHz High level: Rating (5, 12 or 24 V) ±10 % Low level: ≤ 0.5V Load resistance: ≥ 250 Ω for 5 V ≥ 600 Ω for 12 V ≥ 1200 Ω for 24 V ■ Photo MOSFET Relay Pulse Maximum frequency: 30 Hz Timer: Limits ON time within 75 ±25 msec. for wider than 75 msec. pulses Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω INSTALLATION Current consumption: Approx. 80 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 200 g (0.44 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

MODEL: 10PP 10PP SPECIFICATIONS ES-0861 Rev.9 Page 3/4 http://www.m-system.co.jp/ OUTPUT LOGIC Applicable for both Output 1 and 2. HH H L OFF ON OFF OFF ON ON LL INPUT TYPE Voltage Pulse Mechanical Contact Open Collector INPUT VOLTAGE PULSE OUTPUT OPEN COLLECTOR or PHOTO MOSFET RELAY PULSE OUTPUT EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 7–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 25 (.98) 1 2 5 6 7 8

MODEL: 10PP 10PP SPECIFICATIONS ES-0861 Rev.9 Page 4/4 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Waveform Shaper Output Driver OUTPUT 1

12 V Supply

  • Timer is provided for low frequency open collector or photo MOSFET relay pulse output. For 1 output channel type, OUTPUT 1 is also connected to the card-edge connector inside. Note: The section enclosed by broken line is only for 2nd output channel. Isolation Output Driver OUTPUT 2 6CONNECTOR OUTPUT 2 POWER 4kΩ ■ Mechanical Contact or Open Collector Input Connection Examples +12V ■ Voltage Pulse +12V ■ Open Collector Output Connection Examples ■ Voltage Pulse ■ Photo MOSFET Relay Pulse
  • AC Powered

8 LOAD

  • DC Powered

+ 3 + 3 U Specifications are subject to change without notice.