10PH EDI | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
SINGLE-PHASE FULL WAVE BRIDGE
10 AMPERES
FOR P.C. BOARD AND HEAT SINK MOUNTING 10PH Note 1: Derate Io by 20% for capacitive loads EDI reserves the right to change these specifications at any time without notice INTEGRALLY MOLDED HEAT SINK PROVIDES LOW THERMAL RESISTANCE SPACE SAVING IN-LINE DESIGN This product has recognition under the components program of Underwriters Laboratories, inc. PRV/Leg 50V 100V 200V 400V 600V 800V 1000V Type No. 10PH05 10PH10 10PH20 10PH40 10PH60 10PH80 10PH100 Average Output Current, IO @65 oC TC (Fig.1) 10 Amp Max.Forward Voltage Drop, VF =1.0 V @ IF= 2.5 Amp , IR 10 Max. D C Reverse Current @ PRV and 100 o C, IR 300 Max. Peak Surge Current, IFSM (8.3ms) (Fig.2) 300 Amp Thermal Resistance, R0j-c 4.5Typ. oC/ W Ambient Operating Temperature Range, TA -55 to +150 oC Storage Temperature Range, TSTG -55 to +150 oC A A ELECTRICAL CHARACTERISTICS PER LEG (at TA=25 C Unl ess Oth erw ise Spe cifie d) Max. DC Reverse Current @ PRV
FIG.1 FIG.2 CURRENT DERATING 0 25 50 75 100 125 150 TL TC HEAT SINK MOUNTING BRIDGE OUTPUT RES.-IND. LOADS Derate current by 20% for capacitive loads LlO.AVERAGE FORWARD CURRENT(AMP) O C)TEMPERATURE O NUMBER OF CYCLES AT 60 CPS 1 2 5 10 20 50 100 500 100 200 1000 NON-REPETITIVE SURGE CURRENT MAX.PEAK SURGE CURRENT I FSM .220 .160 .700 .260 .205 .052 .085 .185 .455 .280.935 .180 .140 .660 .180 .185 .048 .065 .165 .405 .260.895 1.0Min .760Max. .075R.Typ. (2 Places) CASE STYLE FOR 10PH 21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * FAX 914-965-5531 * 1-800-678-0828 ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. LEADS P BOARD MOUNTING WITH C 10PH O Ee-mail:sales@edidiodes.com Wwebsite: http://www.edidiodes.com* INTEGRAL HEAT SINK Dielectric test voltage 2500 volts rms, Max. 50-60Hz NOTE Maximum lead and terminal temperature for soldering, 3/8 inch from case 5 seconds at 250 C