10JT MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: 10JT http://www.m-system.co.jp/ 10JT SPECIFICATIONS ES-0863 Rev.9 Page 1/3 High-density Signal Conditioners 10-RACK THERMOCOUPLE TRANSMITTER (field-programmable) Functions & Features

  • Accepting direct input from a thermocouple and providing two standard process signals
  • Microprocessor based
  • Field-programmable T/C type and temperature range
  • Linearization
  • Burnout protection
  • High accuracy cold junction compensation
  • Loop testing via hand-held programmer PU-2x
  • Second channel output available at the front terminals and at the Standard Rack connector Typical Applications
  • Ideal for quick spare part
  • High-accuracy cold junction compensation benefits narrow span measurements
  • 0.1μA burnout sensing enables long distance transmission with minimum offset drifts
  • Electric furnace (isolation)
  • No burnout type can connect to a single T/C in parallel with a recorder MODEL: 10JT-[1][2][3]-R[4]

ORDERING INFORMATION

  • Code number: 10JT-[1][2][3]-R[4] Specify a code from below for each [1] through [4]. (e.g. 10JT-2A6-R/BL/Q)
  • Temperature range (e.g. 0 – 800°C) K thermocouple setting will be used if the input code is not specified.
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT THERMOCOUPLE 1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) 2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) 4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) 5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) 7: R (Usable range -50 to +1760°C, -58 to +3200°F) 8: S (Usable range -50 to +1760°C, -58 to +3200°F) N: N (Usable range -270 to +1300°C, -454 to +2372°F) 0: Specify [2] OUTPUT 1 Current A: 4 – 20 mA DC (Load resistance 600 Ω max.) Voltage 6: 1 – 5 V DC (Load resistance 500 Ω min.) [3] OUTPUT 2 0: None Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) Burnout blank: Upscale burnout /BL: Downscale burnout /BN: No burnout blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • Programming Unit (model: PU-2x)
  • PC configurator software (model: JXCON) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types.

MODEL: 10JT http://www.m-system.co.jp/ 10JT SPECIFICATIONS ES-0863 Rev.9 Page 2/3 GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: Card-edge connector and M3.5 screw terminals (torque 0.8 N·m) Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output 1 to output 2 to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Linearization: Standard Cold junction compensation: CJC sensor attached to the input terminals Adjustments: Programming Unit (model: PU-2x); (Refer to the users manual of JXCON for the adjustments configurable with JXCON.)

  • T/C type
  • temp. range
  • zero and span
  • simulating output
  • Others INPUT SPECIFICATIONS Minimum span: 3 mV Offset: Max. 3 times span Input resistance: 20 kΩ min. Burnout sensing: 0.1 μA Minimum span (PR): 370°C, 670°F K (CA): 75°C, 140°F E (CRC): 50°C, 90°F J (IC): 60°C, 110°F T (CC): 75°C, 140°F R: 360°C, 650°F S: 380°C, 690°F N: 110°C, 200°F Remark: The described accuracy may be partially not satisfied when the temperature ranges below 0°C. Consult factory. If not specified, the input range is shown below. (PR): 0 to 1600°C K (CA): 0 to 1000°C E (CRC): 0 to 500°C J (IC): 0 to 500°C T (CC): 0 to 300°C B (RH): 0 to 1800°C R: 0 to 1600°C S: 0 to 1600°C N: 0 to 1000°C INSTALLATION Current consumption: Approx. 60 mA with voltage output 1 Approx. 90 mA with current output 1 Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 220 g (0.49 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % Linearization accuracy: ±0.05 % Cold junction compensation error: ±0.5°C or ±0.9°F (at 20°C ±10°C or 68°F ±18°F) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.8 sec. (0 – 90 %) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

MODEL: 10JT http://www.m-system.co.jp/ 10JT SPECIFICATIONS ES-0863 Rev.9 Page 3/3 DIMENSIONS unit: mm (inch) 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 7–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 25 (.98) 1 2 5 6 7 8 TERMINAL ASSIGNMENTS 1 2 5 6 7 8 CJC SENSOR (model: CJM) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Output Driver OUTPUT 1 SZ Output Driver OUTPUT 2 6CONNECTOR *1 output type has the output 1 connected to the card-edge connector in parallel. Remark 1) The section enclosed by broken line is only for 2nd output channel. Low Drift Amplifier Digital Computation SERIAL TRANSMISSION LINE T / C CJC SENSOR metal leg model: CJM comp. leadwire Burnout OUTPUT 2* POWER PU-2❑ MODULAR JACK Specifications are subject to change without notice.