10ETS12STRL

10ETS12 IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Major Ratings and Characteristics Characteristics 10ETS.. Units IF(AV) Sinusoidal waveform 10 A VRRM Range 800 to 1200 V IFSM 200 A VF @ 10 A, TJ = 25°C 1.1 V TJ - 40 to 150 °C Capacitive input filter TA = 55°C, TJ = 125°C 12.0 16.0 A common heatsink of 1°C/ W Output Current in Typical Applications Applications Single-phase Bridge Three-phase Bridge Units INPUT RECTIFIER DIODE SAFEIR Series 10ETS12, 10ETS12S Bulletin I2121 rev. C 12/01 1www.irf.com TO-220AC Package Outline D2 Pak (SMD-220) Package Outline Description/Features The 10ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. VF < 1V @ 10A IFSM = 200A VRRM 800 to 1200V

10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 www.irf.com IF(AV) Max. Average Forward Current 10 A @ T C = 105° C, 180° conduction half sine wave IFSM Max. Peak One Cycle Non-Repetitive 170 10ms Sine pulse, rated VRRM applied Surge Current 200 10ms Sine pulse, no voltage reapplied I2t Max. I 2t for fusing 130 10ms Sine pulse, rated V RRM applied 145 10ms Sine pulse, no voltage reapplied I2√t Max. I 2√t for fusing 1450 A 2√s t = 0.1 to 10ms, no voltage reapplied Part Number VRRM , maximum V RSM , maximum non repetitive I RRM peak reverse voltage peak reverse voltage 150°C VV m A 10ETS08, 10ETS08S 800 900 0.5 10ETS12, 10ETS12S 1200 1300 Voltage Ratings TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction 2.5 °C/W DC operation to Case RthJA Max. Thermal Resistance Junction 62 °C/W to Ambient (PCB Mount)* Ts Soldering Temperature 240 °C wt Approximate Weight 2 (0.07) g (oz.) Case Style TO-220AC, D 2Pak (SMD-220) Thermal-Mechanical Specifications Parameters 10ETS.. Units Conditions Absolute Maximum Ratings Electrical Specifications Parameters 10ETS.. Units Conditions A A2s VFM Max. Forward Voltage Drop 1.1 V @ 10A, T J = 25°C rt Forward slope resistance 20 m Ω VF(TO) Threshold voltage 0.82 V IRM Max. Reverse Leakage Current 0.05 T J = 25 °C

0.50 T J = 150 °C

Parameters 10ETS.. Units Conditions TJ = 150°C VR = rated VRRMmA * When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994

Bulletin I2121 rev. C 12/01 10ETS.., 10ETS..S SAFEIR Series www.irf.com Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 100 110 120 130 140 150 02468 1 0 1 2 120 180 Maxi mum Al l owabl e Case Temperatur e ( C) Conduction Angle Average Forward Current (A) 10ETS.. Series R (DC) = 2.5 C/WthJC 100 110 120 130 140 150 0 2 4 6 8 10 12 14 16 18 DC 120 180 Maxi mum Al l owabl e Cas e Temperatu re ( C) Conduction Period Average Forward Current (A) 10ETS.. Series R (DC) = 2.5 C/WthJC 02468 1 0 RMS Limit 180 120 Conduction Angle Average Forward Current (A) Maximum Average Forward Power Loss (W) 10ETS.. Series T = 150 C J 0 2 4 6 8 10 12 14 16 DC 180 120 RMS Limit Conduction Period Average Forward Current (A) Maxi mum Aver age Forward Power Los s ( W) 10ETS.. Series T = 150 CJ 100 120 140 160 180 200 11 0 1 0 0 Number Of Equal Amplitude Half Cycle Current Pulses (N) Peak Hal f Sine Wave Forward Current (A) Initial T = 150 C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s J 10ETS.. Series At Any Rated Load Condition And With Rated V Applied Following Surge.RRM 100 120 140 160 180 200 220 240 0.01 0.1 1 Pulse Train Duration (s) Peak Hal f Sine Wave Forward Current (A) 10ETS.. Series Versus Pulse Train Duration. Maximum Non Repetitive Surge Current Initial T = 150 C No Vo ltage Reap plied Rated V ReappliedRRM J

10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 www.irf.com Fig. 9 - Thermal Impedance ZthJC Characteristics Fig. 8 - Forward Voltage Drop Characteristics 0.1 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Steady State Value (DC Operation) 10ETS.. SeriesSingle Pulse thJCTransient Thermal Impedance Z ( C/W) 100 00 . 511 . 522 . 53 T = 25 CJ Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) T = 150 CJ 10ETS.. Series

Bulletin I2121 rev. C 12/01 10ETS.., 10ETS..S SAFEIR Series www.irf.com 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Outline Table TO-220AC Dimensions in millimeters (inches) 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT D2Pak (SMD-220) Dimensions in millimeters and inches Anode 1 3 C athode Base Cathode Anode 1 3 Base Cathode Anode

10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 www.irf.com Dimensions in millimeters and inches TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR. Tape & Reel Information 9G3A 9512 EXAMPLE: THIS IS AN 10ETS12S INTERNATIONAL RECTIFIER LOGO PART NUMBER Marking Information DATE CODE (YYWW) YY = YEAR WW = WEEK ASSEMBLY LOT CODE (K) (A)(A) 10ETS12S

Bulletin I2121 rev. C 12/01 10ETS.., 10ETS..S SAFEIR Series www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.

10 E T S 12 S TRL

Ordering Information Table 6 7 08 = 800V 12 = 1200V 1 - Current Rating 2 - Circuit Configuration E = Single Diode T = TO-220AC 4 - Type of Silicon S = Standard Recovery Rectifier 5 - Voltage code: Code x 100 = V RRM 6 - S = TO-220 D 2Pak (SMD-220) Version 7 - Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel