1VR1 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Two-Stage General Purpose RFI Power Line Filter The dual T section RFI power line filters provide premium performance at moderate cost. They are well suited for low impedance loads where noisy RFI environments are present. They control pulsed, continuous and/or intermittent interference, providing protection to your equipment from power line noise in addition to protecting the line from equipment noise. The R series dual T type provides low leakage current without deterioration of insertion loss characteristics and at a competitive cost. The ER models meet the low leakage current requirements of VDE portable equipment, and (120 Volt) UL2601 non-patient medical equipment. Specifications Maximum leakage current,each line-to-ground VR Models ER Models @ 120 VAC 60 Hz: .4 mA .21 mA @ 250 VAC 50 Hz: .7 mA .36 mA Hipot rating (one minute): line-to-ground 2250 VDC line-to-line 1450 VDC Operating frequency: 50/60 Hz Rated voltage (max.): 250 VAC Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency–MHz Rating .15 .5 1 5 10 30 VR Models 1A, 3A 30 65 65 65 65 65 2A, 5A, 10A, 20A 5 44 60 65 65 60 ER Models 1A, 3A 25 60 65 65 65 65 2A, 5A, 10A, 20A 2 35 51 63 60 50 Line-to-line in 50 ohm circuit Current Frequency–MHz Rating .15 .5 1 5 10 30 VR, ER Models 1A, 3A – – 65 60 54 46 2A, 5A, 10A, 20A – – 35 60 57 45 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject Germany: 49-89-6089-0 are metric equivalents. to change. R Series R Series CORCOM Product Guide Electrical Schematic Resistor location for reference only. LINE LOAD 10VR6 VR7/ER7 VR1/ER1 VR3/ER3 Case Style 20VR6 Note: Same layout for 20VR1 and 20ER1, except .250 [6.35] (5) terminals replace Screw Terminals of 20VR6. E DB 2.00 50.8 A Terminals: No. 8-32 (5) C Slots: .250 6.35 .156 3.96x (4) Torque 18 ± 2 in.lb UL Recognized CSA Certified VDE Approved

Two-Stage General Purpose RFI Power Line Filter (Continued) Case Dimensions ABC DE ± .015Part No. (max) (max) (max) (max) ± .38 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject Germany: 49-89-6089-0 are metric equivalents. to change. RFIPowerLineFilters R Series CORCOM Product Guide Case Styles Part Numbers 01VR1 01ER1 01VR3 01ER3 02VR1 02ER1 02VR3 02ER3 03VR1 03ER1 03VR3 03ER3 03VR7 03ER7 03VR7M 03ER7M 05VR1 05ER1 05VR3 05ER3 05VR7 05ER7 05VR7M 05ER7M 10VR1 10ER1 10VR3 10ER3 10VR6 10ER7 10VR7 10ER7M 10VR7M 20ER1 20VR1 20VR6 Line Cord (R7/R7M): GA400 R1 (except 20 Amp) D E A C B Typical dimensions: A D E C B Brown Blue Brown Blue Green/ Yellow C B E D A Terminals: No. 8-32 (5) Mounting holes .188 [4.78] Dia. (2) Typical dimensions: Torque: 18 ± 2 in.lb R7 & R7M (with metric insert) 10VR6 A Tapped insert: D B E C .235 5.96 1.575 40.01 .157 3.98 .910 23.11 Dia. (2) 1.295 32.89 R No. M-3 x .5 (2)-R7M Typical dimensions: † ±.02 [±.5] Tolerance ±.005 [0.13] Panel Cutout (back mount)