DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

E P & VP Series Dual Stage RFI Power Line Filters for Switching Mode Power Supplies Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com Maximum leakage current each Line to Ground: VP Models EP Models @ 120 VAC 60 Hz: .73 mA .21 mA @250 VAC 50 Hz: 1.27 mA .36 mA Hipot rating (one minute): Line to Ground: 2250 VDC Line to Line: 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 3 to 20A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io= Ir(85-Ta)/45 Dual stage filter offers high insertion loss

  • Well suited for meeting CISPR 22 A and FCC Part 15J, Class B
  • EP model meets very low leakage current requirements
  • 7A and 12A versions offer optimum package size O rdering Inform ation

3 EP 7 M

Suffix M – Metric inserts (style 7 only) Omit for standard or none Input / Output Style 1 – .250 [6.3] spade terminals 3 – Wire leads 6 – Threaded bolt 7 – IEC inlet* (line side) .250 [6.3] spade terminals (load side) EP / VP Series EP – Low leakage (<0.5 mA) VP – Standard (20A only) Current Rating 3, 6, 7, 10, 12 or 20A Specifications E lectrical Schem atic LINE LOAD UL Recognized CSA Certified VDE Approved EP7 / VP7 EP3 / VP3 A vailable Part Num bers 3EP1 10EP1 3EP3 10EP3 3EP7 12EP1 3EP7M 12EP3 6EP1 20EP1 6EP3 20EP6 7EP1 20VP1 7EP3 20VP6 EP1 / VP1 *IEC 60320-1 C14 inlet mates with C13 connector GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord A ccessories

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com EP / VP Series Dual Stage RFI Filters for Switching Power Supplies (continued) C ase Styles EP1 / VP1 (1-15A) D E A C B 20EP1 / VP1 D E A C B EP3 E D A C BBlue Brown Blue Brown Green/ Yellow EP7 & EP7M A Tapped insert D E C B 20EP6 / VP6 C B E D A Recom m ended Panel Cutout .235 5.96 1.575 40.01 .157 3.98 .910 23.11 Dia. (2) 1.295 32.89 R

Dual Stage RFI Filters for Switching Power Supplies (continued) Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help co rcom.com Perform ance Data Typical Insertion Loss Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) 3EP db 100 0 0.01 0.1 1 10 30 Frequency in MHz 6EP db 100 0 0.01 0.1 1 10 30 Frequency in MHz Measured in closed 50 Ohm system Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system Differential Mode / Symmetrical (Line to Line) Part No. ABCDE C ase Dim ensions Typical Insertion Loss (continued) 12EP db 100 0 0.01 0.1 1 10 30 Frequency in MHz 20EP db 100 0 0.01 0.1 1 10 30 Frequency in MHz 7EP db 100 0 0.01 0.1 1 10 30 Frequency in MHz 10EP db 100 0 0.01 0.1 1 10 30 Frequency in MHz 20VP db 100 0 0.01 0.1 1 10 30 Frequency in MHz