DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Power Inlet Filters & Power Entry Modules E JT Series High Performance Power Inlet Filter 163 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com UL Recognized CSA Certified VDE Approved*

  • Superior EMI filter with IEC 60320-1 inlet
  • Double three element differential mode circuit attenuates noise up to 1GHz
  • Up to 15A with IEC 60320-1 C14 inlet
  • 20A rating with IEC 60320-1 C20 inlet
  • Spade terminals or wire leads O rdering Inform ation

6 EJT 1

1 – .250 [6.3] spade terminals 8 – Wire leads EJT Series Current Rating 1, 3, 6, 10, 15 or 20A EJT1 Maximum leakage current each Line to Ground: 1-15A 20A @ 120 VAC 60 Hz: .25 mA .22 mA @250 VAC 50 Hz: .43 mA .40 mA Hipot rating (one minute): Line to Ground: 2250 VDC Line to Line: 1450 VDC Rated Voltage (max.): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 1 to 20A* Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io= Ir(85-Ta)/45 Specifications A vailable Part Num bers 1EJT1 1EJT8 3EJT1 3EJT8 6EJT1 6EJT8 10EJT1 10EJT8 15EJT1 15EJT8 20EJT1 20EJT8 *15A versions are tested by Underwriters Laboratories to US and Canadian requirements and are VDE approved at 10A, 250VAC. 20A versions are tested by Underwriters Laboratories to US and Canadian requirements and are VDE approved at 16A, 250VAC. EJT8 GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord A ccessories FA601: Insulating Shroud (fits 1-15A only) Dia..413 10.5 Dia..271 6.9 1.39 35.4 .118 3.0 1.17 29.7 .767 19.5

High Performance Power Inlet Filter(continued) 164 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com E lectrical Schem atics LINE LOAD Note 1: 20A Versions only C ase Styles EJT1 B D E C A EJT8 ED A B Brown Green/Yellow Blue C 20EJT8 Brown Green/Yellow Blue A C ED B Part No. ABCDE C ase Dim ensions 20EJT1 D E C A B Recom m ended Panel Cutouts 1.20 30.48 .062 1.57 .820 20.83 R Max. Front Mount Only Tolerance ±.005 [.13] 1.575 40.00 0.140 3.56 Dia. 1.370 34.80 .062 1.57 1.055 26.80 R Max. 1.654 42.01 0.138 3.51 Dia. 1 to 15A 20A

High Performance Power Inlet Filter(continued) Power Inlet Filters & Power Entry Modules 165 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com Perform ance Data Typical Insertion Loss Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) 1EJT 3EJT Measured in closed 50 Ohm system Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system 6EJT 10EJT Differential Mode / Symmetrical (Line to Line) 15EJT db 100 0 0.1 1 10 100 1000 Frequency in MHz db 100 0 0.1 1 10 100 1000 Frequency in MHz db 100 0 0.1 1 10 100 1000 Frequency in MHz db 100 0 0.1 1 10 100 1000 Frequency in MHz db 100 0 0.1 1 10 100 1000 Frequency in MHz 20EJT db 100 0 0.1 1 10 100 1000 Frequency in MHz