MPC5-12 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • Ultra-wide voltage input range
  • Low no-load power consumption
  • Protection:Short Circuit/Ove[ver Voltage
  • Super Small Design
  • Low Ripple & Noise, high efficiency Model Information Part Number DC Voltage Rated Current Rated Power Max. Capacitive Load MPC5-5 5V 1A 5W 3000uF MPC5-12 12V 0.416A 4.992W 1200uF MPC5-24 24V 0.208A 4.992W 220uF Voltage Range 85-305V AC, 100-430V DC Frequency Range 47-63Hz Average Efficiency(Typ.) 77.5% MPC5-5 80.5% MPC5-12 81.5% MPC5-24 AC Current (Typ.) 0.13A/115V AC, 0.07A/230V AC Inrush Current(Typ.) Cold Start 15A/115V AC Cold Start 25A/230V AC Leakage Current <0.25mA/277V AC,50Hz Input

Page <2> V1.010/04/25 PCB Mount Power Supply AC To DC Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Output Ripple & Nose(max.) 100mVp-p All Series Voltage Tolerance ±2% Other Line Regulation ±0.5% All Series Load Regulation ±1% All Series Setup,Rise Time 600ms, 30ms/230V AC at full load 600ms, 30ms/115V AC at full load Hold Up Time (Typ.) 50ms/230V AC at full load 5ms/115V AC at full load Protection Over Current ≥130% Rated Output current Protection type: Shut down O/P voltage, recovers automatically after current goes down Short Circuit Protection type: Hiccup mode, allowing long short circuit mode, re-power on to recover Over Voltage MPC15-5 : ≤7.5V DC MPC15-12 : ≤16V DC MPC15-24 : ≤30V DC Protection type: Output voltage clamp or Hiccup mode Environment Working Temp. -40°C to +85°C (Refer to "Derating Curve") Working Humidity 20 ~ 95% RH Non-Condensing Storage Temp, Humidity -40°C~+85°C,10 ~ 95% RH non-condensing Temp. Coefficient ± 0.02%/°C(0~50°C) MTBF 2602K hrs min. MIL-HDBK-217F (25°C) Projected Lifetime >130Kh/230V AC, 25°C at full load >20Kh/220V AC, 55°C at full load >27Kh/220V AC, 55°C at 80%load Altitude Application 5000m

Page <3> V1.010/04/25 PCB Mount Power Supply AC To DC Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 1. All parameters without special description are measured under the conditions of input 230VAC, rated load, ambient temperature 25°C,and ambient humidity less than 75%. 2. Ripple&noise are measured from peak to peak with band width limit of 20MHz (0.1uf and 47uf /50V parallel capacitor under DC output full load, AC nominal input 25°C ambient temperature). 3. Tolerance :includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to”EMI testing of component power supplies.” 6. The ambient temperature derating of 3.5°C/1000m is needed for operating altitude greater than 2000m(6500ft). Physical Property Length × Width × Height 25.4× 25.4 × 17.6mm PCB Mounting Style Weight 17.5g (PCB Mounting Style) Cooling Method Natural Air Cooling Texture Black flame retardant and heat resistant plastic Curve

Page <4> V1.010/04/25 PCB Mount Power Supply AC To DC Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Dimensions and Installation Pin-Out Pin Function

1 AC/L

2 AC/N

3 NO Pin

annotation: unit of size:mm Pin diameter tolerances:±0.1 General tolerances:±0.5 Pin-Mode Pin Function

1 AC/N

2 AC/L

annotation: unit of size:mm Connection Wire diameter :24-12AWG tightening torque:Max 0.4 N*m Unmarked tolerance:±1 Terminal Blocks Style External Dimension

Page <5> V1.010/04/25 PCB Mount Power Supply AC To DC Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Pin-Mode Pin Function annotation: unit of size:mm Connection Wire diameter :24-12AWG tightening torque:Max 0.4 N.m Guide type:TS35,Guide rails need to be grounded Unmarked tolerance:±1.00 Din Rail Style External Dimension Typical application circuit MODEL C1(uF) C2(uF) FUSE R1 TVS MOV MPC5-5 150 1A/300V Slow fuse, must be connected 12Ω/3W (Winding resistor, must be connected) SMBJ7A 10D561KMPC5-12 120 SMBJ20A MPC5-24 68 SMBJ30A Figure 1:Typical application circuit Functional Diagram