10D MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: 10D http://www.m-system.co.jp/ 10D SPECIFICATIONS ES-0822 Rev.8 Page 1/2 High-density Signal Conditioners 10-RACK CURRENT LOOP SUPPLY (non-isolated) Functions & Features
- Powering a 4 – 20 mA DC current loop
- Electrically isolating output signal from power input
- Shortcircuit protection
- Applicable to smart transmitters Typical Applications
- Various 2-wire transmitters MODEL: 10D–A60–R[1]
ORDERING INFORMATION
- Code number: 10D-A60-R[1] Specify a code from below for [1]. (e.g. 10D-A60-R/Q)
- Specify the specification for option code /Q (e.g. /C01) INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) OUTPUT Voltage 6: 1 – 5 V DC (Load resistance 250 kΩ min.) OUTPUT 2 0: None POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: Card-edge connector and M3.5 screw terminals (torque 0.8 N·m) Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input or output to power SUPPLY OUTPUT Output voltage: 24 – 32 V DC with no load Current rating: ≤ 22 mA DC
- Shortcircuit Protection Current limited: 30 mA max. Protected time duration: No limit INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated OUTPUT SPECIFICATIONS The output goes below 0 % when the input is open. INSTALLATION Current consumption: Approx. 50 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 200 g (0.44 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % (accuracy of the receiving resistor) Temp. coefficient: ±0.003 %/°C (±0.002 %/°F) (temp. coefficient of the receiving resistor) Line voltage effect to supply output: ±3 % over voltage range
MODEL: 10D http://www.m-system.co.jp/ 10D SPECIFICATIONS ES-0822 Rev.8 Page 2/2 Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input or output to power)
1500 V AC @ 1 minute (input or output or power to ground)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 7–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 25 (.98) 1 2 5 6 7 8 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM OUTPUT Current Limiter 250Ω 2-WIRE TRANSMITTER mA MONITOR (4 – 20mA DC) 5 6CONNECTOR OUTPUT POWER Internal resistance of ammeter: ≤10Ω Specifications are subject to change without notice.