10BQ060 IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1 Amp

PD - 2.438A The 10BQ060 surface-mount Schottky rectifier has been de- signed for applications requiring very low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging and reverse battery protection.

  • Small footprint, surface mountable
  • Very low forward voltage drop
  • High frequency operation
  • Guard ring for enhanced ruggedness and long-term reliability Characteristics 10BQ060 Units IF(AV) Rectangular 1.0 A waveform VRRM 60 V IFSM @ tp = 5µs sine 700 A VF @ 1.0Apk, TJ = 125°C 0.54 V TJ -55 to 150 °C Major Ratings and Characteristics Description / Features SMB CASE STYLE CASE OUTLINE

VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Parameters 10BQ Units Conditions TJ Max.Junction Temperature Range -55 to 150 °C TSTG Max. Storage Temperature Range -55 to 150 °C RthJA Max. Thermal Resistance, Junction 140 °C/W DC operation — See Fig. 4 to Ambient RthJL Max. Thermal Resistance, Junction 36 °C/W DC operation to Lead ➁ wt Approximate Weight 0.10 g Case Style SMB Similar to DO-214AA Parameters 10BQ Units Conditions VFM Max. Forward Voltage Drop 0.57 V @ 1.0A See Fig. 1 0.73 V @ 2.0A 0.54 V @ 1.0A 0.66 V @ 2.0A IRM Max. Reverse Leakage Current 0.1 mA TJ = 25°C See Fig. 2 5.0 mA TJ = 125°C CT Max. Junction Capacitance 62 pF VR = 5VDC, (test signal range 100KHz to 1MHz) 25°C L S Typical Series Inductance 2.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10,000 V/µs (Rated VR) Parameters 10BQ Units Conditions IF(AV) Max. Average Forward Current 1.0 A 50% duty cycle @ TC = 103°C, rectangular waveform See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive 700 A 5µs Sine or 3µs Rect. pulse Following any rated load condition Surge Current — see Fig. 7 42 10ms Sine 0r 6ms Rect. pulse and with rated VRRM applied. EAS Non - Repetitive Avalanche Energy 11 mJ TJ = 25°C, IAS = 1.0A, L = 4.0mH IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1µsec Frequency limited by TJ max. VA = 1.5 X VR typical Voltage Ratings Absolute Maximum Ratings TJ = 25°C TJ = 125°C VR = rated VR Thermal-Mechanical Specifications Electrical Specifications Pulse Width < 300µs, Duty Cycle < 2% ➁ Mounted 1 inch square PCB, thermal probe connected to lead 2mm from package

Fig. 4 Max. Thermal Impedance ZthJL Characteristics Fig. 2 Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 Typical Junction CapacitanceVs. Reverse Voltage Fig. 1 Max. Forward Voltage Drop Characteristics 100 1000 0 10 20 30 40 50 60 T = 25°CJ Reverse Voltage - V (V)R 0.0001 0.001 0.01 0.1 0 20 40 60 R 100°C 75°C 50°C 25°C Reverse Voltage - V (V) 125°C T = 150°CJ 0.1 FM Forward Voltage Drop - V (V) T = 150°C T = 125°C T = 25°C J J J 0.1 100 Single Pulse (Thermal Resistance) t , Rectangular Pulse Duration (Seconds) D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 PDM Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + TJ DM thJC C

Fig. 5 Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 Forward Power Loss Characteristics Fig.7 Max. Non-Repetitive Surge Current Fig. 8 Unclamped Inductive Test Circuit C U R R E N T M O N IT O R H IG H -S P E E D S W IT C H L D U T R g = 2 5 oh m V d = 25 V o lt+ B R D F R E E -W H E E L D IO D E 4 0H F L 40 S 0 2 Refer to the Appendix Section for the following: Appendix D: Tape and Reel Information — See page 338. 115 120 125 130 135 140 145 150 155 0 0.4 0.8 1.2 1.6 DC Average Forward Current - I (A)F(AV) 10BQ060 R (DC) = 36°C/WthJC 0.0 0.2 0.4 0.6 0.8 1.0 0 0.4 0.8 1.2 1.6 DC F(AV) D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS Limit Average Forward Current - I (A) 100 1000 10 100 1000 10000 At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec)p