10BOS MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MODEL: 10BOS http://www.m-system.co.jp/ 10BOS SPECIFICATIONS ES-0883 Rev.7 Page 1/3 High-density Signal Conditioners 10-RACK CONTACT OUTPUT MODULE Functions & Features
- Accepting status signals from a DCS
- Controlling valve operations
- External switches enables to switch valve operation to manual mode and to direct/reverse actions
- Internal siwtch enables manual operation under DCS control MODEL: 10BOS–1–R[1]
ORDERING INFORMATION
- Code number: 10BOS-1-R[1] Specify a code from below for [1]. (e.g. 10BOS-1-R/Q)
- Specify the specification for option code /Q (e.g. /C01) INPUT Status signal from DCS OUTPUT Relay contact (two) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: M3.5 screw terminals (torque 0.8 N·m) Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input or power to output Test switch: LED indicator INPUT SPECIFICATIONS Input: Status signal from DCS Coil rating: 24 V DC @ 20 mA max. OUTPUT SPECIFICATIONS Output: Relay contact (two) Rating: 220 V AC @ 5 A (cos ø = 1)
24 V DC @ 5 A (resistive load)
Electrical life ≥ 1 × 105 cycles Maximum switching voltage: 264 V AC or 100 V DC Minimum load: 5 V DC @ 10 mA Mechanical life: 5 × 107 cycles For maximum relay life with inductive loads, external protection is recommended.
MODEL: 10BOS http://www.m-system.co.jp/ 10BOS SPECIFICATIONS ES-0883 Rev.7 Page 2/3 T U P T U OT U P N I MAN/DCS MAN.SWITCH SW PULSE OUT. CARD LED LED LED OUTPUT SW FWD REV FWD REV BACK FWD REV FWD REV N ON ON ON OF F ON ON OO T U AF F O OFF OFF ON OFF ON OFF OFF ON OFF OFF ON OFF ON OFF OFF OFF OFF OFF OFF FWD ON ON OFF ON OFF ON OFF OFF OFF ON OFF ON OFF OFF ON OFF ON OFF ON OFF OFF OFF ON OFF ON OFF REV ON ON OFF OFF ON OFF ON OFF OFF OFF ON OFF ON OFF ON OFF OFF ON OFF ON OFF OFF OFF ON OFF ON N ON ON ON ON ON ON ON O F F ON OF F ON ON OF F O N OF F ON OF F ON ON OF F O F F OF F OF F OF F ON OF F O INSTALLATION Current consumption: Approx. 40 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 300 g (0.66 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input or output to power)
1500 V AC @ 1 minute (output to ground)
LED (red) LED (amber) TEST SWITCH
MODEL: 10BOS http://www.m-system.co.jp/ 10BOS SPECIFICATIONS ES-0883 Rev.7 Page 3/3 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 91 (3.58) 99 (3.90 ) 50 (1.97) 26 (1.02) 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 12 (.47)12 (.47) M3.5 SCREW 1 2 3 4 5 6 7 8 9 10 11 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM REV 8 9 Motor Driver 10 11 FWD 6 7 REVFWD Remote Control 2 3 1 REVFWD Manual Operation MAN - DCS SWITCH X1 X2 X3 X4 CONNECTOR Power REVFWD AUTO Specifications are subject to change without notice.