10458C-SA EMCORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Highly reliable planar photodiode technology „ High power capability „ Bandwidth up to 22 GHz „ Good RF matching, 12 dB typ. „ MICROWAVE

Applications

Parameter Min Typical Max Units Storage Temperature -40 - +85 °C Operating Temperature -10 25 +50 °C Responsivity 0.7 - - A/W Receiver Gain (1 GHz) -9.1 - - dB (A/W) Dark Current (25C) - - 5 nA Max Current - - 10 mA Optical Input - - 11 dBm RF Return Loss 8 12 - dB Optical Wavelength Range 1280 - 1580 nm Optical Return Loss - - -40 dB Antenna Remoting „ Military Communications „ Phased Arrays „ EW „ Delay Lines for Radar Calibration „ Performance Highlights Parameter Symbol Condition Min Typical Max Units Bandwidth f 3dB 10458C 10458D 10458E 10458F 0.05 0.05 0.05 0.05 GHz Impedance Z Resistively matched SMA connector - 50 - Ohm S21 Flatness - 50 MHz – 10 GHz (C & D)

50 MHz – 20 GHz (E)

50 MHz – 22 GHz (F)

Specifi ed characteristics apply for the recommended operating conditions at beginning of life, 25°C, unless noted otherwise. Typical S21 Data RF Characteristics

50 MHz 22 GHz

PIN Microwave Photodiode Receiver

Ordering Information

10458C-SA Receiver 5 GHz, SMA, AC Coupled, SC/APC 10458C-FA Receiver 5 GHz, SMA, AC Coupled, FC/APC 10458D-SA Receiver 10 GHz, SMA, AC Coupled, SC/APC 10458D-FA Receiver 10 GHz, SMA, AC Coupled, FC/APC 10458E-SA Receiver 20 GHz, SMA, AC Coupled, SC/APC 10458E-FA Receiver 20 GHz, SMA, AC Coupled, FC/APC 10458F-SA Receiver 22 GHz, SMA, AC Coupled, SC/APC 10458F-FA Receiver 22 GHz, SMA, AC Coupled, FC/APC 10990A System 10000 Equipment Chassis 10901G-NA System 10000 Power Supply, US Power Cord 10901G-UK System 10000 Power Supply, UK Power Cord 10901G-EU System 10000 Power Supply, EU Power Cord Outline Drawing MICROWAVE Pinout Pin Number Description 1 +15VDC

2 No Connection

3 No Connection

4 Ground

1 Ground

61 Photodiode Current Monitor 1v / 1 mA

71,2 Received Optical Power Alarm

81 No Connection

91 No Connection

Rev: March 9, 2009 1. Pins 5 - 9 can be be monitored at the rear of the System 10000 chassis 2. Open collector alarm, external 1K pull-up requred capable of sinking 20 mA.