1098579 COHERENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Sapphire FP is a series of true fiber-pigtailed lasers based on Coherent’s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL technology not only provides established legacy wavelengths of ion and diode-pumped solid-state lasers, but their scalability also allows for customized wavelengths to be developed and tailored to a specific application. Sapphire FP lasers are manufactured in cleanrooms using Coherent’s patented PermAlign™ technology for optimal aligning and solder- bonding the optics. The fiber is an integral part of the resonator, completely independent of the outer housing. A Coherent proprietary fiber design allows the operation at short wavelengths and/or high powers without fiber degradation or damage. As a result, Sapphire FP lasers deliver excellent output stability, lowest noise, and superior polarization (PER) over a broad ambient temperature operating range (10°C to 40°C). Sapphire FP lasers come with a flexible interface concept: Analog, RS-232, or USB – it is up the user to select the appropriate communi- cation channel. FEATURES & BENEFITS

  • Wavelength versatility - 458 nm to 594 nm
  • Powers: up to 300 mW
  • Outstanding power stability
  • Low noise
  • Broad ambient temperature range: operational and non-operational
  • PermAlign and fiber-pigtail technology - Permanent optimal alignment - Unsurpassed robust and stable
  • Flexible interface concept - Analog, RS-232 & USB
  • Unsurpassed reliability and lifetime

APPLICATIONS

  • Confocal Microscopy
  • Flow Cytometry
  • Genomics & Proteomics
  • High Throughput Drug Screening
  • Medical Diagnostics
  • Semiconductor Inspection

Wavelength1 (nm) 458 ±2 488 ±2 Output Power at Fiber Exit 2 (mW) 40 40, 80, 120, 200 Fiber Type SM-PM3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled 4 Spatial Mode TEM00, M2 <1.1 Beam Asymmetry <1:1.1 Noise (%)

20 Hz to 2 MHz, rms

20 Hz to 20 kHz, peak-to-peak

<0.25 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio 100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS Laser Safety Classification 3b Operating Voltage 5 (VDC) +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) -20 to 60°C (-4 to 140°F) Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (6 ms) 15g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 118 x 76 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2.0 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2m (6.56 ft.) and options Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-to-laser tolerance. 2 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 4 Fiber FC/APC connector output not compatible for patchcord-to-p atchcord connection. 5 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Dimensions respectively weight without fiber-pigtail part.

Wavelength1 (nm) 514 ±2 532 ±2 552 ±2 Output Power at Fiber Exit 2 (mW) 40, 80, 120 40, 80, 120, 200, 300 40, 80, 120 Fiber Type SM-PM3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled 4 Spatial Mode TEM00, M2 <1.1 Beam Asymmetry <1:1.1 Noise (%) <0.25 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio 100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS Laser Safety Classification 3b Operating Voltage 5 (VDC) +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) -20 to 60°C (-4 to 140°F) Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (6 ms) 15g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 118 x 76 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2.0 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2m (6.56 ft.) and options Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-to-laser tolerance. 2 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 4 Fiber FC/APC connector output not compatible for patchcord-to-p atchcord connection. 5 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Dimensions respectively weight without fiber-pigtail part.

Wavelength1 (nm) 561 ±2 588 ±2 594 ±2 Output Power at Fiber Exit 2 (mW) 40, 80, 120, 200 40 40 Fiber Type SM-PM3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled 4 Spatial Mode TEM00, M2 <1.1 Beam Asymmetry <1:1.1 Noise (%) <0.25 Long-term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio 100:1, linear, vertical UTILITY AND ENVIRONMENTAL REQUIREMENTS Laser Safety Classification 3b Operating Voltage 5 (VDC) +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) -20 to 60°C (-4 to 140°F) Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (6 ms) 15g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 118 x 76 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2.0 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2m (6.56 ft.) and options Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-to-laser tolerance. 2 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. 3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm. 4 Fiber FC/APC connector output not compatible for patchcord-to-p atchcord connection. 5 If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Dimensions respectively weight without fiber-pigtail part.

MEASUREMENT TOOLS Part Number Meter FieldMax™II-TO 1098579 Sensor PS10Q 1098400 MECHANICAL SPECIFICATIONS Sapphire FP Datasheet Controller 6.1 mm (0.24 in.) 20.4 mm (0.8 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 0 mm (0.0 in.) 5.1 mm (0.2 in.) 21.1 mm (0.8 in.) 35.3 mm (1.4 in.) 62.6 mm (2.5 in.) 102.9 mm (4.0 in.) 112.4 mm (4.4 in.) 117.8 mm (4.6 in.) 8.3 mm (0.327 in.) 66 mm (2.6 in.) 76.2 mm (3.0 in.) 8.8 mm (0.345 in.) 6.35 mm (0.25 in.) app. 35 mm (1.38 in.) max. 6.1 mm (0.24 in.) 6 spacers with tapped thread M4, UNC #8 or 5/32 BSW are attached USB-Interface Mini USB-Type B 5 pol Serial Interface DSub-9 (female) Analog Interface 26 pin-headertype AMP latch Tyco 281275-1 Laser Head DSub-25 (female) Fuse TE5 5A 127V Littlefuse 3961500000 DC Power Connector Molex Micro Fit 3.0 10 positions Side View Top View

Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire Lasers. For full details of this warranty coverage, please refer to the Service section at www.coherent.com or contact your local Sales or Service Representative. MC-027-12-0M0119Rev.G Copyright ©2019 Coherent, Inc. VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.58 to 0.60 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT . λ 0.55 to 0.58 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 800 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.54 to 0.57 µm 0.79 to 0.82 µm 1.08 to 1.14 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.50 to 0.55 µm 0.79 to 0.82 µm 1.00 to 1.10 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.45 to 0.50 µm 0.79 to 0.82 µm 0.90 to 1.00 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT . λ 0.50 to 0.55 µm 0.79 to 0.82 µm 1.00 to 1.10 µm Max. Power 1300 mW 20 mW 200 mW Coherent, Inc.,

5100 Patrick Henry Drive Santa Clara, CA 95054

p. (800) 527-3786 | (408) 764-4983 f. (408) 764-4646 tech.sales@coherent.com www.coherent.com MECHANICAL SPECIFICATIONS Sapphire FP Datasheet Sapphire FP 6 mm (0.24 in.) 7.5 mm (0.3 in.) 125 mm (4.92 in.) 115 mm (4.53 in.) 40.5 mm (1.59 in.) 5 mm (0.2 in.) 17.9 mm (0.7 in.)34 mm (1.34 in.) 19 mm (0.75 in.) 70 mm (2.76 in.) 55 mm (2.17 in.) Ø6.2 mm (0.24 in.) Front View Side View Top View