10981 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Jumbo Professional Emergency Exit, 40m Large terminal blocks Single and double-sided decals Fully compliant (AS/NZS 2293) Maintained operation Soft-start charger to reduce building load Fast emergency switch-over (<0.5s) for high-task areas Wall, ceiling and rod mounting (with Rod Mount Kit) 12 years design life at max. ambient High Quality Lithium battery (LiFePO4) and smart charger Standalone (SPU) Self test (AS2293/IEC62034) DALI (IEC62386) Ektor wired monitored system Extended viewing distance with 500 x 250 mm decal Wireless monitoring via Ektor Lynk
ORDERING INFORMATION
Description Ektor Mercury 40M Jumbo emergency LED exit - PRO - Black Driver Type DALI DT1 Emergency Item Code EV-MERCURY-40M-PRO-B MECHANICAL Body Material Powder coated steel Diffuser Material Polycarbonate Fitting Colour Black Installation Type Wall or Ceiling IP Rating IP20 ELECTRICAL Electrical Rating Class I Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 4.5 W Standby Power 2.5 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Working Temp Range 0 to 40 °C DRIVER Dimmable No Driver Included Yes Driver Type DALI DT1 Emergency Wiring Type Re-wireable terminal block (5 pin) EMERGENCY (EM SUFFIX) Replacement Battery Code 01302 Emergency Control DALI Monitored (DT1) DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202. Decal Size 500 x 250 mm Emergency Duration 90 mins Emergency Light Source Life >20Y/00M AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign. Emergency Mode Maintained Emergency Output Power 1400 mW Viewing Distance 40 m 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 5th of February 2025 07:58:29 - Page 1
Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. WARRANTY Commercial Use Warranty 8 RTB (Total 8 Years) DIMENSIONS Product Height 301 mm Product Length 514 mm Product Width 78 mm LINE DRAWINGS EV/MERCURY/40M/PRO ACCESSORIES Order code 02004 Description Rodmount Brackets only for roof and luminaire body - Black (Rod size -25mm) Item Code EV-RODMOUNT-BLK Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 07:58:29 - Page 2