HMC6380LC4B AD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

The HMC6380LC4B is a wideband MMIC Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscillator’s monolithic construction. The Vtune port accepts an analog tuning voltage from 0 to +23V. The HMC6380LC4B VCO operates from a single +5V supply, consumes only 75 mA of current, and is housed in a RoH s compliant sMT package. This wideband VCO uniquely combines the attributes of ultra small size, low phase noise, low power consumption, and wide tuning range. Wide Tuning Bandwidth Pout: +6 dBm Low ssB Phase Noise: -92 dBc/Hz @100 kHz No External Resonator Needed single Positive supply: +5V @ 75 mA Ceramic Leadless sMT Package: 16 mm² Typical Applications Low Noise wideband MMIC VCO is ideal for:

  • Industrial/Medical Equipment
  • Test & Measurement Equipment
  • satcom
  • Military Radar, EW, & ECM Electrical Specifications, TA = +40 °C to + 85 °C, Vcc = +5V [1] Parameter Min. Typ. Max. Units Frequency Range 8.0 - 16.0 GHz Power Output 2 6 9 dBm ssB Phase Noise @ 10 kHz Offset -64 -50 dBc/Hz ssB Phase Noise @ 100 kHz Offset -92 -85 dBc/Hz ssB Phase Noise @ 1 MHz Offset -120 -110 dBc/Hz supply Current (Icc) (Vcc = +5V) 75 85 mA Tune Voltage (Vtune) 0 23 V Tune Port Leakage Current (Vtune = +23V) 100 µA Tuning sensitivity 200 450 600 MHz/V Output Return Loss 10 dB 2nd Harmonic -11 dBc 3rd Harmonic -25 dBc Pulling (into a 2.0:1 VsWR) 28 MHz pp Vcc Pushing, Frequency = 16 GHz 55 MHz/V Frequency Drift Rate 0.5 MHz/°C [1] A broadband load VsWR of ≤ 2.0:1, across the frequency range of 0.01-16 GHz, is required for proper operation.

v03.1118 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Frequency vs. Tuning Voltage, Vcc = +5V Sensitivity vs. Tuning Voltage Typical SSB Phase Noise @ Vtune = +10VSSB Phase Noise vs. Tuning Voltage Supply Current Output Power vs. Tuning Voltage 0 2 4 6 8 10 12 14 16 18 20 22 +25C +85C -40C OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (Vdc) 100 200 300 400 500 600 0 2 4 6 8 10 12 14 16 18 20 22 +25C +85C -40C TUNING SENSITIVITY (MHz/VOLT) TUNING VOLTAGE (Vdc) -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 0 2 4 6 8 10 12 14 16 18 20 22 +25C 10kHz +25C 100kHz +25C 1MHz +85C 10kHz +85C 100kHz +85C 1MHz -40C 10kHz -40C 100kHz -40C 1MHz SSB PHASE NOISE (dBc/Hz) TUNING VOLTAGE (Vdc) 0 2 4 6 8 10 12 14 16 18 20 22 +25C +85C -40C OUTPUT POWER (dBm) TUNING VOLTAGE (Vdc) 0 2 4 6 8 10 12 14 16 18 20 22 + 25C + 85C - 40C Icc (mA) TUNING VOLTAGE (Vdc) -150 -140 -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 3 104 105 106 107 + 25C + 85C - 40C SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz)

v03.1118 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Absolute Maximum Ratings Reliability Information Outline Drawing Junction Temperature To Maintain

1 Million Hour MTTF 135 °C

Nominal Junction Temperature Thermal Resistance (Junction to exposed paddle, 5V supply) 97 °C/W Operating Temperature -40 °C to + 85 °C Vcc +5.5 V Vtune -0.5V to +25V storage Temperature -65 °C to +150 °C EsD sensitivity (HBM) Class 1A EsD sensitivity (FICDM) Class C3 Part Number Package Body Material Lead Finish MsL Rating Package Marking [2] HMC6380LC4B RoHs-compliant Ceramic s MT Package Gold Flash Over Nickel MsL3 [1] H6380 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX

Package Information

NOTEs: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHE s GOLD OVER 50 MICROINCHE s MINIMUM, NICKEL. 3. DIMENsIONs ARE IN INCHEs [MILLIMETER s] 3. LEAD sPACING TOLERANCE I s NON-CUMULATIVE. 5. PACKAGE WARP sHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEAD s AND GROUND PADDLE MU sT BE sOLDERED TO PCB RF GROUND. Typical Supply Current vs. Vcc, +25C Vcc (V) Icc (mA) 4.75 69 5.0 75 5.25 79 0.50 BSC 0.20 MIN

2.50 REF

24-Terminal Ceramic Leadless Chip Carrier [LCC] (E-24-2) Dimensions shown in millimeters. BOTTOM VIEWTOP VIEW 10-10-2018-B 0.36 0.30 0.24 0.38 0.32 0.26 EXPOSED PAD PKG-004841 4.05 3.90 SQ 3.75

3.10 REF

THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. 2.60 2.50 SQ 2.40 PIN 1 0.08 REF SIDE VIEW 1.20 1.10 1.00 SEATING PLANE PIN 1 INDICATOR AREA 24-Terminal Ceramic Leadless Chip Carrier [LCC] (E-24-2) Dimensions shown in millimeters.

v03.1118 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Pin Number Function Description Interface schematic 1 - 3, 5 - 11, 13, 17 - 24 N/C No internal connection. These pins may be connected to RF/DC ground. Performance will not be affected. 4 Vtune Control voltage and modulation Input. Modulation band - width dependent on drive source impedance. .

12 Vcc supply voltage, Vcc= +5V

15 RFOUT RF output (AC coupled)

14, 16 Paddle GND Package bottom has an exposed metal paddle that must be connected to RF & DC ground. Pin Descriptions

v03.1118 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D The circuit board used in the application should use RF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Analog Devices upon request. Evaluation PCB List of Materials for Evaluation PCB 108648-HMC6380LC4B [1] Item Description J1 RF Connector, s MA J2 RF Connector, s MA J3 DC Header C1 1000 pF Capacitor, 0402 Pkg. C2 4.7 µF Capacitor, Tantalum U1 HMC6380LC4B PCB [2] 108646 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350

v03.1118 WIDEBAND MMIC VCO WITH BUFFER AMPLIFIER 8.0 - 16.0 GHz For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Notes: