KTX-WB9114125AZZZZ SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
A B C D E F H I J K L M N O P Q R S T KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS
Ordering information
Type Part no. KTX-WB9114125AZZZZ 1081721 Other models and accessories www.sick.com/KTX_Prime Detailed technical data
Features
Dimensions (W x H x D) 30 mm x 53 mm x 78.5 mm Sensing distance 13 mm Sensing distance tolerance ± 5 mm Housing design (light emission) Rectangular Light source LED, RGB 1) Wave length 470 nm, 525 nm, 625 nm Light emission Long side of housing Light spot size 0.9 mm x 3.8 mm Light spot direction Vertical 2) Teach-in mode 1-point teach-in, 2-point teach-in, dynamic Teach-in, auto mode Output function Light/dark switching Delay time Adjustable Delivery status 2-point teach-in Parameter presettings None 1) Average service life: 100,000 h at TU = +25 °C. 2) In relation to long side of housing.
2 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-18 16:52:21
Subject to change without notice
KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS Mechanics/electronics Ripple ≤ 5 Vpp 2) Power consumption < 100 mA 3) Switching frequency 50 kHz 4) Response time 10 µs 5) Jitter 5 µs Switching output PUSH/PULL Switching output (voltage) Push/Pull: HIGH = VS - 3 V / LOW ≤ 3 V Output current Imax. 100 mA 6) Input, blanking input (AT) Blanked: U = 10 V ... < Uv: free-running: U < 2 V Input, fine/coarse (F/C) Coarse: U = 10 V ... < Uv: fine: U < 2 V Input, light/dark (L/D) Light: U = 10 V ... < Uv: light: U < 2 V Retention time (ET) 25 ms, non-volatile memory Connection type Male connector M12, 5-pin Protection class III Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Enclosure rating IP67 Weight 94 g Housing material VISTAL® 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Total current of all Outputs. Ambient data Ambient operating temperature –20 °C ... +60 °C Ambient storage temperature –25 °C ... +75 °C Shock load According to IEC 60068-2-27 (30 g/11 ms) UL File No. E181493 Classifications ECl@ss 5.0 27270906 ECl@ss 5.1.4 27270906 ECl@ss 6.0 27270906 ECl@ss 6.2 27270906 ECl@ss 7.0 27270906 ECl@ss 8.0 27270906 ECl@ss 8.1 27270906 ECl@ss 9.0 27270906 2018-07-18 16:52:21 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS ETIM 5.0 EC001820 ETIM 6.0 EC001820 UNSPSC 16.0901 39121528 Communication interface Communication interface IO-Link V1.1 Communication Interface detail COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure Bit 0 = switching signal QL1 Bit 1 = empty Bit 2 = Quality of Run Alarm Bit 3 ... 5 = Emission Color Bit 6 … 15 = Measurment Value Emission Color
4 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-18 16:52:21
Subject to change without notice
KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS Dimensional drawing (Dimensions in mm (inch)) KTX Prime 53 (2.09) 78.5 (3.09) 40 (1.57) 28 (1.1)/c50 68 (2.68) /c51 28 (1.1) (0.83) 30.4 (1.2) 30 (1.18) 72 (2.83) /c50 (0.59) /c49 30 (1.18) 30.4 (1.2) /c52 /c49 (0.59) ① Optical axis and light emissionedge / length housing side ② Threaded mounting hole M5 ③ Connector M12 (rotatable up to 180°) ④ Control panel 2018-07-18 16:52:21 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS Adjustments KTS/KTX Prime THR ESC PRO TCHPWR Q 1 2 1 ① LED status indicator ② Display ③ Control panel Connection diagram cd-387 +(L+) Q/IN1 -(M) BN WH BU Q/CBK 4 IN2GY 5
6 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-18 16:52:21
Subject to change without notice
KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS Concept of operation KTS/KTX Prime - Setting the switching threshold (dynamic Teach-in) Switching characteristics The optimum emitted light is selected automatically (at RGB variants). Static teach-in: light/dark setting is defined using teach-in sequence. Dynamic teach-in: switching output active on mark, if background is longer in the field of view during the teach-in. The switching threshold is set in the center between the background and the mark. Keylock (activation and deactivation): Press and hold the “+” pushbutton > 10 s. The Q-LED (yellow) flashes and the “Err” error message appears on the display. Internal signal received Internal signal received Dark switching Light switching Output Q Output Q Switching threshold Switching threshold Example Press the Set pushbutton to start the teach-in process. 1. Position background The display lights up during repeat length detection ( - - - ). 2. Move at least the mark and background using the light spot Press the Set pushbutton to end the teach-in process. The Quality of Teach is displayed. Suitable for teaching in moving objects. KTS/KTX Prime - setting the switching threshold (2-point teach-in) When setting the contrasts to be detected, “1st” flashes. Press set button. When setting the contrasts to be detected, “2nd” flashes. Press set button. The Quality of Teach is displayed. Suitable for manual positioning of the object to be detected, e.g. marks and background. 1. Position mark 2. Position background KTS/KTX Prime - Setting the switching threshold (color mode) When detecting the contrast or color to be detected, “1st” flashes. Press set button. The Quality of Teach-in is displayed. Suitable for teaching in color properties. 1. Position mark/color property 2018-07-18 16:52:21 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 7
A B C D E F H I J K L M N O P Q R S T KTX-WB9114125AZZZZ | KTX Prime CONTRAST SENSORS Characteristic curve Sensing distance 13 mm, light spot direction horizontal/vertical 100 110 Sensitivity in % (0.79) (0.63) (0.47) (0.31) (0.16) Distance in mm (inch) Recommended accessories Other models and accessories www.sick.com/KTX_Prime Brief description Type Part no. Universal bar clamp systems Plate G for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), mounting hardware BEF-KHS-G01 2022464 Plate K for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), mounting hardware BEF-KHS-K01 2022718 Universal clamp bracket for rod mounting, steel, zinc coated, without mounting hard- ware BEF-KHS-KH1 2022726 Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-A 4056054 Mounting bar, straight, 300 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-B 4056055 Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-A 4056052 Mounting bar, L-shaped, 250 x 250 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-B 4056053
8 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-18 16:52:21
Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and eficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer speciications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations □ www.sick.com