ULG ILLINOISCAPACITOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES Small size - High ripple current – super low ESR APPLICATIONS DC-DC Converters – Voltage regulators – Motherboards – De-coupling Operating Temperature Range -55°C to +105°C Capacitance Tolerance +20% at 120 Hz, 20°C WVDC 16 20 25 35 Surge Voltage SVDC 1.15*WVDC WVDC 16 20 25 35 Dissipation Factor Tan δ .12 MAX @120 Hz, 20°C
2 Minutes
Leakage Current 0.2CV or 280uA, Whichever is greater -55°C/ +20°C <1.25 Low Temperature Stability Impedance Ratio 2000 hours at 105°C with rated WVDC and ripple current applied Capacitance Change <20% of initial measured value Dissipation Factor <150% of maximum specified value ESR <150% of maximum specified value Load Life Leakage Current <100% of maximum specified value 1000 cycles at 20°C with rated surge voltage applied for 30 seconds through a 1kΩ resistor and discharged for 5 minutes and 30 seconds Capacitance Change <20% initial measured value Dissipation Factor <150% of maximum specified value ESR <150% of maximum specified value Surge Voltage Life Leakage Current <100% of maximum specified value 1000 hours at 60°C and 90 to 95% RH with no voltage applied Capacitance Change <20% initial measured value Dissipation Factor <150% of maximum specified value ESR <150% of maximum specified value Damp Heat Test Leakage Current <100% of maximum specified value Frequency (Hz)
120 Hz<f<1kHz 1 kHz< f<10 kHz 10 kHz< f<100kHz 100 kHz< f<500kHz Ripple Current Multipliers
0.05 0.3 0.7 1.0 DxL 6.3x8 8x8 8x11.5 10x12.5 S 2.5 3.5 3.5 3.0 d 0.6 0.6 0.6 0.6 L1=L+1.0 mm Max. (D<8mm) mm L1=L+1.5 mm Max. (D>8mm) D1=D+0.5mm Max. S1=S+0.5 mm
+105°C Standard Low ESR Capacitance (µF) WVDC IC PART NUMBER Maximum ESR (Ω) 120 Hz, +20°C Maximum ESR (mΩ) 100 kHz, +20°C Leakage Current (μA) Maximum RMS Ripple Current (mA) 100 kHz, +105°C Dims DxL (mm) 226ULG025MEF 9.04 280 1700 6.3x8 336ULG020MEF 6.03 280 1880 6.3x8 336ULG025MFF 6.03 280 1870 8x8 476ULG020MFF 4.23 280 1952 8x8 476ULG025MFF 4.23 280 1940 8x8 476ULG035MFF 4.23 329 1500 8x6 100 107ULG020MFH 1.99 400 2670 8x11.5 100 107ULG025MFH 1.99 500 2500 8x11.5 100 107ULG035MGU 1.99 700 1870 10x12.5 150 157ULG020MGU 1.33 600 2672 10x12.5 180 187ULG016MFH 1.11 576 4360 8x11.5 220 227ULG025MGU 0.9 1100 3100 10x12.5 220 227ULG035MGU 0.9 1540 2450 10x12.5 330 337ULG016MGU 0.6 1056 5050 10x12.5 330 337ULG035MGU 0.6 2310 2700 10x12.5