10700469 SCHURTER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Changes that contribute to technical improvement are subject to alternations
2006 Datum Name
Bearb. 18.08. Maurer TOUCH SCREEN Gepr. 18.08 Maurer 6,48", 5-Wire Vert. AMT-02516-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0469 Zu Änd. Datum Name D 79346 Endingen page 1 of 4 Index: - Analog 5-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.
1.2 Construction:
Item Description Material Remarks ITO PET (Top layer) New designed printing 0.188mm ITO PET Film Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom layer) New designed printing 1.1 mm ITO Glass Resistance:300~900 Ω/□
3 Tail Base Kapton Separated Tail
4 Tail cover lay Kapton
5 Connector AMP compatible 2,54mm
6 Top layer circuit Silver ink
7 Bottom layer circuit Silver ink
8 Layer to layer contacted Silver ink
9 Dot spacer UV Cure ink
10 Isolation Layer Isolation Adhesive
11 Glue UV Glue
Touch screen side view:
Changes that contribute to technical improvement are subject to alternations Bearb. 18.08. Maurer TOUCH SCREEN Gepr. 18.08 Maurer 6,48", 5-Wire Vert. AMT-02516-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0469 Zu Änd. Datum Name D 79346 Endingen page 2 of 4 Index: -
1.3 Input Method and Activation Force
- Typical Optical Characteristics
2.1 Visible Light Transmission: > 80%
2.2 Haze: < 13%
- Electrical Specifications 3.1 Operating Voltage: 5.5V or less
3.2 Contact current: 20mA (maximum)
3.3 Circuit close resistance: 20~300 Ω
3.4 Circuit open resistance: > 10M Ω at 25VDC
3.5 Contact bounce: < 15ms
3.6 Linearity Specifications: The linearity specifications are based on Hampshire or
PenMount touch screen controllers and drivers to define. 3.6.1 Inner Active Area : 10 mm inside of X and Y active area dimensions. Perimeter of Active Area : The area 10 mm inside of X and Y active area dimensions. Input Method Average Activation Force 16mm dia. Silicon "finger" Less than 1.00 N
Changes that contribute to technical improvement are subject to alternations Bearb. 18.08. Maurer TOUCH SCREEN Gepr. 18.08 Maurer 6,48", 5-Wire Vert. AMT-02516-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0469 Zu Änd. Datum Name D 79346 Endingen page 3 of 4 Index: -
3.6.2 Calculate Linearity
100* % DiagonalAreaActive YXLinearity ∆+∆= £GY £GX 3.6.3 Linearity: Inner Active Area : <1.0% Perimeter of Active Area : <1,5% 3.7 Electrostatic Discharge Protection : (per EN 61000-4- 2 ) The touch screen withstands of 15KV air discharge and 8KV contact discharge. 4. Environment Specification
4.1 Operating Temperature - 10 ° C ~ + 60° C Humidity less than 90% RH, no dew condensation
4.2 Storage Temperature - 40 ° C ~ + 80° C, at Ambient Humidity
- Reliability Test
5.1 Exposure to high temperature
Touch panel is put into a test machine at the condition of 80°C for 504 hours. Then it is left at the room tempera- ture for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
5.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of –40°C for 504 hours. Then it is left at the room tempera- ture for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
Changes that contribute to technical improvement are subject to alternations Bearb. 18.08. Maurer TOUCH SCREEN Gepr. 18.08 Maurer 6,48", 5-Wire Vert. AMT-02516-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0469 Zu Änd. Datum Name D 79346 Endingen page 4 of 4 Index: -
5.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60°C, 90%RH for 504 hours. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
5.4 Thermal Shock
Touch panel is put into a test machine at the condition of –40°C for 30 minutes, and then 80°C for 30 minutes. The process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measure- ment must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 6. Durability test:
6.1 Finger touches
Touch panel is hit 36 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per second. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 7. Optical Performance: 7.1 Optical inspection method and opti cal defect standards refer to document. A001-2 Touch Screen Optical Quality Standard. 7.2 Outside to Active Area : any optical defected in this ar ea need to be ignored if no effected to touch screen func- tion. 8. Others 8.1 Always store the touch screen in its original shipping container under normal conditions (20~25°C, 65% RH)