10700441 SCHURTER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Changes that contribute to technical improvement are subject to alternations
2002 Datum Name
Bearb. 24.10. Maurer TOUCHSCREEN Gepr. 24.10. Maurer 12,26“, 5-Wire Vert. AMT-02501-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0441 a 500004569 18.08.2006 Maurer Zu Änd. Datum Name D 79346 Endingen Blatt 1 von 3 Index: a Analog 5-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.
1.2 Construction :
Item Description Material Remarks ITO PET (Top layer) 0.188mm ITO PET Film Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom layer) 2.36mm ITO Glass Resistance:300~600 Ω/□
3 Tail Base Kapton Separated Tail
4 Tail Coverlay Kapton
5 Connector AMP Compatible Pitch:2.54mm
6 Top layer circuit Silver ink
7 Bottom layer circuit Silver ink
8 Layer to layer contacted Silver ink
9 Dot spacer UV Cure ink
10 Isolation Layer Isolation Adhesive
Touch screen side view:
Changes that contribute to technical improvement are subject to alternations Bearb. 24.10. Maurer TOUCHSCREEN Gepr. 24.10. Maurer 12,26“, 5-Wire Vert. AMT-02501-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0441 a 500004569 18.08.2006 Maurer Zu Änd. Datum Name D 79346 Endingen Blatt 2 von 3 Index: a
1.3 Input Method and Activation Force
Input Method Average Activation Force 1.6mm dia. Delrin stylus 10~70 grams 16mm dia. Silicon "finger" 10~ 80 grams 2. Typical Optical Characteristics
2.1 Visible Light Transmission: >80%
2.2 Haze: 3~7% (JIS K-7105)
- Electrical Specifications 3.1 Operating Voltage: 5.5V or less
3.2 Contact current: 20mA (maximum)
3.3 Circuit close resistance: 30~300 Ω
3.4 Circuit open resistance: > 10M Ω at 25VDC
3.5 Contact bounce: < 15ms
3.6 Linear Test : <1.5 % 4. Environment Specification
4.1 Operating Temperature - 10 ° C ~ + 60° C Humidity less than 90% RH
4.2 Storage Temperature - 20 ° C ~ + 80° C at Ambient Humidity
- Reliability Test
5.1 Exposure to high temperature
Touch panel is put into a test machine at the condition of 80 for 120 hours. Then it is left at the room temperatu for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
5.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of -20 for 120 hours. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
Changes that contribute to technical improvement are subject to alternations Bearb. 24.10. Maurer TOUCHSCREEN Gepr. 24.10. Maurer 12,26“, 5-Wire Vert. AMT-02501-01 EDV-Datasheet SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN don’t change manually Manufactured by Apex Material Technology Corp. H 1 070.0441 a 500004569 18.08.2006 Maurer Zu Änd. Datum Name D 79346 Endingen Blatt 3 von 3 Index: a
5.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60 , 90%RH for 120 hours. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
5.4 Thermal Shock
Touch panel is put into a test machine at the condition of -20 for 30 minutes, and then 80 for 30 minutes. The process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 6. Durability test:
6.1 Finger touches
Touch panel is hit 36 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per second. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
6.2 Stylus writing
Touch panel is drawn by R0.8 Derlin stylus pen, at 250g forces, repeat one inch by 100K times. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 7. Optical Performance: 7.1 Optical inspection method and opti cal defect standards refer to document. A001-2 Touch Screen Optical Quality Standard. 7.2 Outside to Active Area : any optical defected in this area need to be ignored if no effected to touch screen function. 7.3 Glass defects such as edge chips and scratches refer to A001-2 Touch Screen Optical Quality Standard.
7.4 Others
Always store the touch screen in its original shipping container under normal conditions (20~25°C, 65% RH)