1068406

EXS-06D6203B020 SICK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

EXS-06D6203B020, EXE-06D6203B020 deTec4 Core Ex SAFETY LIGHT CURTAINS

A B C D E F H I J K L M N O P Q R S T EXS-06D6203B020, EXE-06D6203B020 | deTec4 Core Ex SAFETY LIGHT CURTAINS

Ordering information

System part Type Part no. Sender EXS-06D6203B020 1068407 Receiver EXE-06D6203B020 1068406 Included with delivery with every device: 1 system connecting cable with flying leads 30 m in length. Other models and accessories www.sick.com/deTec4_Core_Ex Detailed technical data

Features

System part Sender/receiver pair in explosion-proof enclosure Resolution 30 mm Protective field height 600 mm Scanning range 0 m ... 8 m Response time 10 ms Synchronization Optical synchronisation Safety-related parameters Type Type 4 (IEC 61496) Safety integrity level SIL3 (IEC 61508) SILCL3 (EN 62061) Category Category 4 (EN ISO 13849) Performance level PL e (EN ISO 13849) PFHD (mean probability of a dangerous fail- ure per hour) 3,7 x 10-9 (EN ISO 13849) TM (mission time) 20 years (EN ISO 13849) Safe state in the event of a fault At least one OSSD is in the OFF state. Interfaces System connection Connection type Male connector M12, 5-pin Permitted cable length ≤ 50 m Status display LEDs Fieldbus, industrial network Integration via Flexi Soft safety controller CANopen, DeviceNet, EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP, PROFINET 1) 1) For further information on Flexi Soft, please see sens:Control – safe control solutions product catalog or -> www.sick.com/FlexiSoft.

2 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2016-07-04 20:20:08

Subject to change without notice

EXS-06D6203B020, EXE-06D6203B020 | deTec4 Core Ex SAFETY LIGHT CURTAINS Electrical data Protection class III (EN 50178) Ripple ≤ 10 % 1) Power consumption typical 1.82 W (DC) / 0.91 W (DC) (depending on type) Safety outputs (OSSD) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 2) Switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS) Switching voltage LOW ≤ 2 V DC Switching current ≤ 300 mA 1) Within the limits of VS. 2) Applies to the voltage range between –30 V and +30 V. Mechanical data Housing cross-section (incl. system connec- tion) 161.8 mm x 142.1 mm Weight 28.318 kg (± 50 g) 28.308 kg (± 50 g) (depending on type) Ambient data Enclosure rating IP 66 (EN 60529) Ambient operating temperature –20 °C ... +55 °C Storage temperature –30 °C ... +70 °C Air humidity 15 % ... 95 %, Non-condensing Vibration resistance 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Shock resistance 10 g, 16 ms (EN 60068-2-29) Other information Wave length 850 nm 2016-07-04 20:20:08 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3

A B C D E F H I J K L M N O P Q R S T EXS-06D6203B020, EXE-06D6203B020 | deTec4 Core Ex SAFETY LIGHT CURTAINS Dimensional drawing (Dimensions in mm (inch)) deTec4 Core Ex, 600 mm 6.4 (0.25) 9.5 (0.37) 67.5 (2.66) 58.7 (2.31) 161.8 (6.37) 89.6 (3.53) 44.5 (1.75) 1,100.2 (43.31) 1,068.2 (42.06) 1,035 (40.75) 142.1 (5.59) 50.8 (2.00)

4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2016-07-04 20:20:08

Subject to change without notice

EXS-06D6203B020, EXE-06D6203B020 | deTec4 Core Ex SAFETY LIGHT CURTAINS Connection diagram deTec4 Core safety light curtain connected to UE48-2OS safety relay S34 S21S35 S22 S33 S12S11 S31

14 A2 24 32

13 A1 23 31

n.c. GND +24V 1 +24V n.c. GND n.c. n.c.

24 V DC

0 V DC

Connection of a deTec4 Core safety light curtain to UE48-2OS. Operating mode: with restart interlock and external device monitoring. Function When the light path is clear, the OSSD1 and OSSD2 outputs are live. The system is ready to switch on if K1 and K2 are de-ener- gized. By pressing S1 (button is pressed and released), the UE48-2OS is energized and its 13 - 14 and 23 - 24 contacts activate K1 and K2. On interruption of one of the light beams, the UE48-2OS is de-energized by the OSSD1 and OSSD2 outputs and K1 and K2 are deactivated. Fault analysis OSSD cross-circuits and short-circuits are detected and lead to the inhibited state (lock-out). The incorrect functioning of one of the K1 or K2 contactors will be detected and does not result in the loss of the shutdown function. Jamming of the S1 button will pre- vent the UE48-2OS from enabling. Comments 1) Output circuits: These contacts are to be connected to the controller such that, with the output circuit open, the dangerous state is disabled. For categories 4 and 3, the integration must be dual-channel (x/y paths). Single-channel integration in the control (z path) is only possible with a single-channel control and by taking the risk analysis into account. Recommended accessories Other models and accessories www.sick.com/deTec4_Core_Ex Brief description Type Part no. Terminal and alignment brackets 2016-07-04 20:20:08 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 5

A B C D E F H I J K L M N O P Q R S T EXS-06D6203B020, EXE-06D6203B020 | deTec4 Core Ex SAFETY LIGHT CURTAINS Brief description Type Part no. 2 pieces, alignment bracket for explosion-proof enclosure BEF-1SHABRST2 2072525 Plug connectors and cables Cable gland for the European market Cable gland 5329001 Alignment aids Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into the beam! AR60 1015741 Adapter AR60 for explosion-proof enclosure AR60 adapter, Ex 2074849 Test and monitoring tools 30 mm diameter Test rod 30 mm 2022602

6 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2016-07-04 20:20:08

Subject to change without notice

SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com