WL12GC-3P2472A71 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
A B C D E F H I J K L M N O P Q R S T WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Illustration may differ
Ordering information
Type Part no. WL12GC-3P2472A71 1067779 Other models and accessories www.sick.com/W12G Detailed technical data
Features
Sensor/ detection principle Photoelectric retro-reflective sensor, autocollimation Dimensions (W x H x D) 15.5 mm x 48.5 mm x 42 mm Housing design (light emission) Rectangular Sensing range max. 0 m ... 4 m Sensing range 0 m ... 4 m 1) Type of light Visible red light Light source PinPoint LED 2) Light spot size (distance) Ø 25 mm (1.5 m) Wave length 660 nm Adjustment IO-Link, Single teach-in button 3) Pin 2 configuration External input, Teach-in input, Sender off input, Detection output, logic output, alarm output quality of run Diagnosis Quality of run, Quality of teach-in AutoAdapt ✔ 1) Reflector PL80A. 2) Average service life: 100,000 h at TU = +25 °C. 3) Mode I, 10 % attenuation.
2 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-08 18:00:44
Subject to change without notice
WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Smart Task Smart Task name Counter Debouncing Logic function Direct WINDOW Hysteresis Timer function Deactivated On delay Off delay ON and OFF delay Impulse (one shot) Inverter Yes Maximum counting frequency SIO Direct: --- 1) SIO Logic: 1500 Hz 2) IOL: 1000 Hz 3) Counter reset SIO Direct: --- SIO Logic: 1,5 ms IOL: 1,5 ms Min. Time between two process events (switches) SIO Direct: --- SIO Logic: 450 µs IOL: 500 µs Debounce time max. SIO Direct: --- SIO Logic: 30.000 ms IOL: 30.000 ms Switching signal QL1 Output type (dependant on the adjusted threshold) Switching signal QL2 Output type (dependant on the adjusted threshold) Measuring value Counting value 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/“deac- tivated”). 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used. 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters. Communication interface Communication interface IO-Link Communication Interface detail V1.1 COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 ... 15 = measuring value 2017-11-08 18:00:44 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption ≤ 30 mA 3) Output type PNP Switching mode Light/dark switching Signal voltage PNP HIGH/LOW Approx. VS – 2.5 V / 0 V Output current Imax. ≤ 100 mA Response time Q/ on Pin 2 200 µs ... 300 µs 4) 5) Switching frequency 1,500 Hz 6) Switching frequency Q / to pin 2 ≤ 1,500 Hz 7) Attenuation along light beam > 8 % Connection type Male connector M12, 4-pin Circuit protection A 8) B 9) C 10) D 11) Protection class III Weight 120 g Polarisation filter ✔ IO-Link ✔ Transmission rate COM2 Housing material Metal, Zinc diecast Optics material Plastic, PMMA Enclosure rating IP66 IP67 Special feature Detecting transparent objects Ambient operating temperature –40 °C ... +60 °C Ambient storage temperature –40 °C ... +75 °C UL File No. NRKH.E181493 & NRKH7.E181493 Repeatability Q/ on Pin 2: 100 µs 5) 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) Signal transit time with resistive load. 5) Valid for Q \\ on Pin2, if configured with software. 6) With light/dark ratio 1:1. 7) With light / dark ratio 1:1, valid for Q \\ on Pin2, if configured with software. 8) A = VS connections reverse-polarity protected. 9) B = inputs and output reverse-polarity protected. 10) C = interference suppression. 11) D = outputs overcurrent and short-circuit protected. Classifications ECl@ss 5.0 27270902
4 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-08 18:00:44
Subject to change without notice
WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS ECl@ss 5.1.4 27270902 ECl@ss 6.0 27270902 ECl@ss 6.2 27270902 ECl@ss 7.0 27270902 ECl@ss 8.0 27270902 ECl@ss 8.1 27270902 ECl@ss 9.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 UNSPSC 16.0901 39121528 Adjustments possible WL11-2, Teach-in /c50 /c51 /c54 ② LED indicator yellow: Status of received light beam ③ Green LED indicator: power on, teach-in mode IBlue LED indicator: teach-in mode II ⑥ Single teach-in button, Function 1: teach-in sensitivity on reflector, Function 2: change operation/teach-in mode Connection diagram Cd-367 1 + (L+) QL1 /C MF – (M) BN BK WH BU 2017-11-08 18:00:44 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Light spot size Senso r 4,000 (157.48) 1,000 (39.37) 2,000 (78.74) 500 (19.69) 11.5 (0.45) 33.0 (1.30) 17.5 (0.69) 3,000 (118.11) 43.0 (1.69) 65.0 (2.56) All dimensions in mm (inch) Distance Sensing range diagram WL12G-3 0 4.0 0 3.0 0 3.5 0 3.5 0 3.0 0 1.8 0.6 /c56 /c55 /c54 /c53 /c52 /c51 /c50 0 4.0 /c49 Sensing range max. 0 1.0 (3.28) 2.0 (6.56) 4.0 (13.12) 3.0 (9.84) Distance in m (feet) ① Reflector PL80A ② Reflector C110A ③ Reflector P250F ④ Reflector PL50A ⑤ Reflector PL40A ⑥ Reflector PL30A ⑦ Reflector PL20A ⑧ Reflective tape REF-IRF-56 Functions Lichtdämpfung / Objekttyp / Teach-in-Zeit / Teach-in time Ext. Teach-in über Lei‐ tung / Ext. cable teach-in Anzeige-LED / LED indicator PET-Flasche / Folie / Teach-in-Modus für Ob‐ jekte / Teach-in mode for objects I PET-Flasche / Folie/ glas II 10 % Glas / Colored glass bottles
6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-08 18:00:44
Subject to change without notice
WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Dimensional drawing (Dimensions in mm (inch)) 17.9 (0.70) 7.3 (0.29) 23.1 (0.91) 6.1 (0.24) 48.5 (1.91) 5.1 (0.2) 42 (1.65) 29.9 (1.18) ø 4.2 (0.91) 32 (1.26) 15.6 (0.61) ① Optical axis ② LED indicator yellow: Status of received light beam ③ LED indicator green: Supply voltage active ④ M4 threaded mounting hole, 4 mm deep ⑤ Mounting hole, Ø 4.2 mm ⑥ Sensitivity setting: single teach-in button ⑦ Connection Recommended accessories Other models and accessories www.sick.com/W12G Brief description Type Part no. Universal bar clamp systems Plate N02 for universal clamp bracket, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N02 2051608 Plate N03 for universal clamp bracket, zinc coated, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N03 2051609 Plate N04 for universal clamp, steel, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N04 2051610 Device protection (mechanical) Protective housing for universal clamp, Zinc plated steel (protective housing), Zinc die cast (clamping bracket), Universal clamp, mounting hardware BEF-SG-W12-3 2045175 2017-11-08 18:00:44 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 7
A B C D E F H I J K L M N O P Q R S T WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Brief description Type Part no. Mounting brackets and plates Mounting bracket, large, Stainless steel, mounting hardware included BEF-WG-W12 2013942 Mounting bracket, small, Stainless steel, mounting hardware included BEF-WK-W12 2012938 Terminal and alignment brackets Double clamp bracket for dovetail mounting, Aluminum (anodised), mounting hardware included BEF-DKH-W12 2013947 Clamping block for dovetail mounting, Aluminum (anodised), mounting hardware includ- ed BEF-KH-W12 2013285 Modules and gateways IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage 18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A) IOLP2ZZ-M3201 (SICK Memory Stick) 1064290 IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A IOLA2US-01101 (SiLink2 Master) 1061790 EtherCAT IO-Link Master, IO-Link V1.1, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable IOLG2EC-03208R01 (IO-Link Master) 6053254 EtherNet/IP IO-Link Master, IO-Link V1.1, power supply via 7/8'' cable 24 V / 8 A, field- bus connection via M12-cable IOLG2EI-03208R01 (IO-Link Master) 6053255 PROFINET IO-Link Master, IO-Link V1.1, Class A port, power supply via 7/8'' cable 24 V /
8 A, fieldbus connection via M12 cable
(IO-Link Master) 6053253 Reflectors Rectangular, screw connection, 80 mm x 80 mm, PMMA/ABS, Screw-on, 2 hole mount- ing PL80A 1003865 Fine triple reflector, screw connection, suitable for laser sensors, 47 mm x 47 mm, PM- MA/ABS, Screw-on, 2 hole mounting P250F 5308843 Fine triple reflector, screw connection, suitable for laser sensors, 18 mm x 18 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL10F 5311210 Fine triple reflector, screw connection, suitable for laser sensors, 38 mm x 16 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL20F 5308844 Fine triple reflector, screw connection, suitable for laser sensors, 56 mm x 28 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL30F 5326523 Fine triple reflector, screw connection, suitable for laser sensors, 76 mm x 45 mm, PM- MA/ABS, Screw-on, 2 hole mounting PL81-1F 5325060
8 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-08 18:00:44
Subject to change without notice
WL12GC-3P2472A71 | W12G PHOTOELECTRIC SENSORS Brief description Type Part no. Suitable for laser sensors, self-adhesive, cut, see alignment note, 56.3 mm x 56.3 mm, self-adhesive REF-AC1000-56 4063030 Chemically resistant, screw connection, 47 mm x 47 mm, Plastic, Screw-on, 2 hole mounting P250 CHEM 5321097 Fine triple reflector, chemically resistant, screw connection, 18 mm x 18 mm, Plastic, Screw-on, 2 hole mounting PL10F CHEM 5321636 Chemically resistant, screw connection, suitable for laser sensors, 16 mm x 38 mm, Plastic, Screw-on, 2 hole mounting PL20F-CHEM 5326089 Stainless steel reflector, hygienic design, chemically resistant, enclosure rating IP69K, D12 adapter shaft, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), D12-adapter shaft PLH25-D12 2063404 Stainless steel reflector, hygienic design, chemically resistant, Enclosure rating IP 69K, M12-adapter thread, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), M12- adapter thread PLH25-M12 2063403 Stainless steel reflector, washdown design, chemically resistant, IP 69K enclosure rat- ing, screw connection, 14 mm x 14 mm, Stainless steel V4A (1.4404, 316L), Screw-on, 2 hole mounting PLV14-A 2063405 2017-11-08 18:00:44 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 9
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com